Simplify installation with this Universal Trigger Output Module by PAC. The TR-7 provides three trigger outputs including one positive 12V at 2A and two negative outputs rated at 150mA that can be programmed for pulsed, latched, or timed outputs. Timed outputs are programmed by number and can be programmed up to four minutes and 15 seconds. There are two input triggers, one positive and one negative.
Q: Why is digital timing important in this device?
A: The accurate digital timing eliminates the need for separate potentiometers.
Q: Does this module have a safety interlock feature?
A: Yes, this module has a safety interlock feature for installing a car video system on a vehicle without a parking brake.
Q: How many outputs does this device have?
A: This device has three separate outputs: one positive 12V output rated at 2 amps and two negative outputs rated at 150mA.
Q: How many preprogrammed modes or features does this device have?
A: This device has 16 preprogrammed modes or features.
Q: What is the maximum programmable delay time for the timed output?
A: The timed output allows for programmable delays of up to 4 minutes and 15 seconds.
Q: Does this for a 2011 Lincoln navigator
A: This is a universal piece that can be used in any vehicle.
Rating 5 out of 5 stars with 4 reviews
The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.

Simplify installation with this Universal Trigger Output Module by PAC. The TR-7 provides three trigger outputs including one positive 12V at 2A and two negative outputs rated at 150mA that can be programmed for pulsed, latched, or timed outputs. Timed outputs are programmed by number and can be programmed up to four minutes and 15 seconds. There are two input triggers, one positive and one negative.

Add an amplifier to nearly any radio with the KISLOC2 Stereo Line-Out Converter. Experience true sonic accuracy at any volume level with all the sparkling highs and thunderous lows of your original audio. KISLOC2 Stereo Line-Output Converter Unlike traditional LOCs the KISLOC2 is designed without inductors to deliver a completely flat frequency response at all volume levels. Using nothing more than your factory speaker wires the innovative KISLOC2 automatically converts the speaker signal into both an RCA signal and a powerful 100 milli-amp 12-volt remote wire using DC offset. Powerful enough to turn on multiple amplifiers the 12-volt remote wire delivers plenty of power without hunting for a switched 12-volt power source. Accepts up to 55 watts (16 volts) of input signal Fully compatible with standard radios and most smart radios* Delivers up to an 8-volt output signal Flat 20Hz-20kHz frequency range at all volume levels Includes a powerful 100 milli-amp remote turn-on wire. No 12V power source needed! LED indicator for DC offset turn-on *Amplifier output of smart radio must have 60 impedance or lower. What's in the Box 46KISLOC2 line output converter Owner's manual Specifications Accepts up to 55 watts (16 volts) of input signal Fully compatible with standard radios and most smart radios* Delivers up to an 8-volt output signal Flat 20Hz-20kHz frequency range at all volume levels Includes a powerful 100 milli-amp remote turn-on wire. No 12V power source needed! LED indicator for DC offset turn-on

Easily replace the factory radio in your GM vehicle with this all-in-one Radio Replacement and Steering Wheel Control Interface with OnStar Retention by PAC. The RadioPRO5 RP5-GM51 interface comes pre-loaded with OnStar retention, steering wheel control software, navigation-based output signals and more to help simplify aftermarket radio installation while retaining your vehicle’s factory features. Antenna adapter not included.

Easily replace the factory radio in your Toyota, Lexus, or Scion vehicle with this all-in-one Radio Replacement and Steering Wheel Control Interface by PAC. The RP4.2-TY11 interface comes pre-loaded with amplifier retention and steering wheel control software, navigation-based output signals and more to help simplify aftermarket radio installation while retaining your vehicle’s factory features. This radio replacement and steering wheel control interface includes wired outputs for navigation radio installation and is direct USB updatable.
| Pros for PAC - Universal Trigger Output Module - Black | |||
|---|---|---|---|
| There were no pros for this product— | Overall Performance, Ease of use, Installation, Compatibility, Remote Turn-On | Overall Performance, Functionality | Ease of use, Installation, Compatibility, Steering Wheel Control, Sound Quality |
| Cons for PAC - Universal Trigger Output Module - Black | |||
| There were no cons for this product— | Price | There were no cons for this product— | Price, Backup Camera |