This tilting mount is compatible with most 26" - 40" flat-panel TVs and features an innovative locking mechanism for quick and easy installation. The fingertip tilt allows for smooth movement and optimal viewing.
Not right for my space
Posted by: Jonisverytall from: on
It is meant to go on one stud and is not long enough to go across two wall studs. This meant I could not center the tv on my wall. It is probably a fine mount but you should probably locate your studs prior to purchase to determine if you can use.
24 out of 25 found this review helpful.
Easy Install, Great Mount
Posted by: jrconradson from: Auburn, AL on
Installed this mount in about 20 minutes. Easy to follow instructions and worked perfectly with my TV. TV was still on the wall this morning when I left for work so I have no complaints.
17 out of 17 found this review helpful.
Excellent! Easy to install and works perfectly.
Posted by: klingcam from: CA on
No-brainer to attach to TV and wall. Check your model TV to confirm that the mounting holes on the back of your TV will in fact match up with the holes on the mounting brackets. Also, make sure you adjust the tilt BEFORE you put the TV on the wall, because clearance behind the TV is minimal once installed and you won't be able to turn the tilt adjustment knobs while it's on the wall. Works really well, but slightly pricy. Overall, though, love it.
17 out of 18 found this review helpful.
Posted by: DRsmith1 from: ky on
While i disagree that ANY of the mounts that are available have "value for price" (my god people, these could be made for about 10$, yet cost upwards of 70 or 80$ and up to 200$!), this mount is at least slightly cheaper than most other mounts, and offers the same size/weight capacity...and has the tilt feature.
The assembly process was quick, and it mounted up to the studs easily. The only gripe i have is that the "tilt" adjustment is hard to get to without actually taking the tv back of the wall in a "trial and error" type manner.
overall, im satisfied with it.
12 out of 12 found this review helpful.
Posted by: trainer101 from: Peachtree City, GA on
Great product. Easy to install and sturdy. Only minor issue of making adjustments to the tilting after tv is installed.
7 out of 7 found this review helpful.
ANYone can hang an HDTV with this simple mount.
Posted by: Brnies from: Waxahachie on
If you know how to find wall studs then you can hang a HDTV flat panel all by yourself. Okay, well it's better if you have two people to lift the tv and set it on the wall mount but you certainly don't need to pay the geek squad 250.00 to do it.
Just remember to bolt to studs AND most importantly, use a LEVEL to level the wall mount so that your tv will hang straight. It's a simple device really and comes with easy instructions. Your wall mount bolts to the wall, your tv hangs on the wall mount; it's that easy.
7 out of 7 found this review helpful.
Great TV wall mount bracket for 26" LDC/LED TV
Posted by: 99Corvette from: San Antonio, TX on
This is an easy to install low profile 26" LCD/LED TV wall mount bracket... especially if you are mounting your TV above eye level...it tilt-adjusts up-down-left-right...and the price was very reasonable
5 out of 5 found this review helpful.
Easy to put up, holds TV well
Posted by: Chuck107 from: Keene, NH on
I was expecting to mount this on two studs, but noticed it requires one stud once I opened it up. Regardless, it mounted easily and is holding well. If the stud wasn't already centered, I would be nervous about moving the TV 8" to the side of this mount to make it centered as it would cause uneven weight distribution and thus more force being applied from one direction rather than the other. Fortunately, my stud is centered.
I don't really need to tilt the TV after installing, but it tilts easily when I try, and I can reach the knobs behind it to adjust the tension (but I don't need to - default tension seems appropriate for the weight of my 37" Insignia TV, allowing it to be tilted at a different angle and just the right tension to still hold in place).
Before buying this, I bought a Sanus that I had to return because it didn't have the right sized screws; my TV needed the M5 screws, and Sanus had M4 and M6 but no M5. This Rocketfish has M5, although I'd guess there will be TV's that won't work for this but do work for the Sanus.
Also, my Insignia TV for some reason has the power cord stick out the back instead of from the bottom, making low profile mounts a problem for it. But, it was no problem here; the cord sticking out the back has enough room and is not pressed against the wall.
4 out of 4 found this review helpful.
simple to install for a large flat screen TV
Posted by: frenchfrei from: California on
excellent choice for the wall mounting of our 40" TV
3 out of 3 found this review helpful.
I like my Rocketfish Wall Mount
Posted by: Robba from: Princeton Jct NJ on
Works well, but I purchased a 32 inch Samsung and the mounting hardware that came with the product did not include the right screws for the back of my Samsung. I needed to go to a hardware store (Lowe's) and purchase the proper size screws for my tv. Once I got them, it was pretty easy to mount.