About This Item
This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. FeaturesVM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylusAluminum cantileverSpecially wound coils increase output voltageDurable low-resonance polymer housingThreaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts requiredCompatible with any AT-VMN95 replacement stylusWhat's in the BoxAT-VM95E Dual Moving Magnet CartridgeTwo 11mm installation screwsTwo 8mm installation screwsTwo washersSpecificationsFrequency response: 20 - 22000HzChannel separation: 20dB at 1kHzVertical tracking force: 1.8 - 2.2g (2.0g standard)Stylus construction: Bonded round shankRecommended load impedance: 47000 ohmsOutput: 4.0mV (1kHz 5cm/sec)Channel balance: 2.0dB (1kHz)Stylus shape: 0.3 x 0.7 mil ellipticalCantilever: Aluminum pipeMount: Half-inchReplacement stylus: AT-VMN95ECoil impedance: 3.3k ohms (1kHz)DC resistance: 485 ohmsLoad capacitance: 100 to 200pFCoil inductance: 550mH (1kHz)Vertical tracking angle: 23°Dimensions (H x W x D): 0.68" x 0.74" x 1.2"<
