Audio-Technica - AT‑VM95E/BK Dual Moving Magnet Cartridge & Headshell - Black

This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.FeaturesUniversal 1/2" Mount Headshell for 4-Pin Turntable CartridgesVM95 Series Dual Magnet Cartridge with 0.3 x 0.7 mil Elliptical StylusAluminum CantileverSpecially Wound Coils Increase Output VoltageDurable Low-Resonance Polymer HousingSimple Installation with any AT-VMN95 Replacement StylusWhat's in the BoxAT‑VM95E/BK Dual Moving Magnet Cartridge & HeadshellInstallation HardwareSpecificationsFrequency Response: 20-22000 HzChannel Separation: 20 (dB at 1 kHz)Vertical Tracking Angle: 23°Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)Stylus Construction: Bonded round shankRecommended Load Impedance: 47000 ohmsCoil Impedance: 3.3 k ohms (1 kHz)DC Resistance: 485 ohmsCoil Inductance: 550 mH (1 kHz)Output Voltage: 4.0 mV (1 kHz 5 cm/sec.)Output Channel Balance: 2.0 dB (1 kHz)Stylus Shape: 0.3 x 0.7 mil ellipticalCantilever: Aluminum pipeStatic Compliance: 17 x 10 – 6 cm / dyneDynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)Mounting: Half-inchCartridge Weight: 6.1gDimensions: 17.2 mm (0.68") H × 18.9 mm