Audio-Technica - Audio Technica AT-LP60X-GM Turntable Gunmetal - Black/Gunmetal

If you already own passive type speakers, you will need to install a stereo receiver or amplifier between the turntable and the speakers. Receivers and Amplifier have a POWER amplifier inside to amplify connected sources, such as a turntable, up to a level that can adequately drive the speakers. Another option would be to use POWERED (aka active) type speakers. Powered speakers have their own power amplifier built into them so there is no need for a separate stereo receiver or amplifier. Due to the inclusion of a phono preamplifier in the turntable, the turntable may be connected to devices that either do or do not have a dedicated PHONO input for a turntable. A phono preamplifier raises the phono level signal from a turntable (which is very weak) to a stronger line level signal (such as that which you get from a CD Player) so it can drive the preamplifier section of a receiver, amplifier or powered speaker, then the preamplifier drives the power amplifier. Its all about gain staging so that, in the end, you have a good signal to noise ratio. A phono preamplifier also applies the RIAA equalization curve which is required for the playback of records.

Yes, RCA cables are included with this turntable.

Yes, this turntable has an integrated preamp.

Yes, this turntable includes a hinged detachable dust cover.

This turntable plays 33-1/3 and 45 rpm record speeds.