Cable Leader - 14 AWG Heavy-Duty Computer Power Cord, NEMA 5-15P to IEC C13, 15A 125V for PC, Monitor, Printer, Projector - Blue
Model: PW116
SKU: 13200064
Reviews coming soon
Reviews coming soon
Lost the original cord, or need a longer, shorter, or heavier one for your PC, monitor, or printer? This Cable Leader 14 AWG heavy-duty computer power cord is a 3-prong power cord with a standard NEMA 5-15P plug for any 120V wall outlet, power strip, or UPS and an IEC C13 connector for the C14 inlet on your device, rated 15A at 125V for up to 1875W, 50 percent more current than a typical 10A 18 AWG cord. Three 14 AWG copper conductors run inside a flexible SJT jacket rated to 105°C, and this UL Listed AC power cord has molded ends for strain relief. A universal power cord replacement for any device using an IEC C14 inlet, including desktop and gaming PC power supplies (PSU), monitors, laser and inkjet printers, projectors, scanners, servers, and network switches. Best for: replacing a lost or damaged PC power cord or monitor power cable, or reaching a far outlet with a long power cord. Not for: 2-prong devices, C7 figure-8, C5 cloverleaf, or C20 inlets, 240V circuits, or outdoor use. RoHS compliant.
Use this IEC C13 power cord as a direct replacement power cord, or as a heavier upgrade, for the standard 3-prong cord on a desktop PC power supply, computer monitor, printer, projector, or server. The NEMA 5-15P plug fits any standard North American wall outlet, power strip, surge protector, or UPS, and the C13 connector fits the recessed 3-pin C14 inlet on the back of the device.
Three 14 AWG copper conductors are rated for a 15 amp load at 125 volts, up to 1875 watts, 50 percent more current than the 10A 18 AWG monitor power cord or PC power cable that ships with most devices. That headroom suits a high-wattage PC power supply, workstation, 3D printer, or laser printer, and the heavier gauge keeps voltage drop low on long runs. UL Listed construction, manufactured to RoHS environmental standards.
Compatible with any device using an IEC C14 inlet. Quick check: desktop PC, monitor, or printer with a 3-pin C14 inlet - Yes; projector, server, or network switch with a C14 inlet - Yes; C7 figure-8 or C5 cloverleaf inlet - No; C20 inlet - No, it needs a C19 cord. Tight space behind the device? Our 14 AWG right-angle version turns the cord at the C13 end.
The SJT jacket is VW-1 flame-rated and rated to 105°C, yet flexible enough to route behind a desk or through rack cable management, and both ends are molded over the terminations for strain relief. Pick a 1 ft or 2 ft short power cord for a rack or power strip, 6 ft or 10 ft for a desk, or 25 ft to 50 ft to reach a distant outlet. Black, white, red, and blue help you tell cords apart.
Each batch is sample-tested during production for continuity and fit. Manufactured to RoHS environmental standards. If your cord arrives defective or stops working in normal use, Cable Leader handles replacement requests directly - no manufacturer redirects.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.