Cable Leader - 14 AWG Right-Angle Computer Power Cord, NEMA 5-15P to 90-Degree IEC C13, 15A 125V for PC, Monitor, Server Rack - Black
Model: PW190-12XX
SKU: 13219998
Reviews coming soon
Reviews coming soon
Does a straight power cord stick out behind your PC, monitor, or rack gear and keep it off the wall? This Cable Leader 14 AWG right-angle computer power cord is a 3-prong AC power cord with a standard NEMA 5-15P plug for any 120V outlet, power strip, or UPS and a 90-degree IEC C13 connector that turns the cord along the back panel instead of straight out, rated 15A at 125V for up to 1875W. Three 14 AWG copper conductors run inside a flexible black SJT jacket with molded ends and UL Listed construction. A universal power cord replacement for any device using an IEC C14 inlet, including desktop and gaming PC power supplies, monitors, printers, projectors, servers, and network switches. Best for: a heavy-duty PC power cable or monitor power cable behind a desk, on a wall mount, in an AV cabinet, or in a server rack where a straight C13 has no room. Not for: 2-prong devices, C7 figure-8, C5 cloverleaf, or C20 inlets, 240V circuits, or outdoor use. RoHS compliant.
This right angle power cord turns 90 degrees at the IEC C13 end, so the cord leaves the connector sideways and runs along the device instead of sticking straight out. Use it as a 90-degree computer power cord for a PC or monitor pushed close to the wall, a VESA-mounted monitor, a ceiling-mounted projector, or rack gear behind a closed rear door. The wall-plug end is a standard straight NEMA 5-15P.
Three 14 AWG copper conductors are rated for a 15 amp load at 125 volts, up to 1875 watts, which is 50 percent more current than a typical 10A 18 AWG computer cord. That headroom suits a high-wattage PC power supply (PSU), workstations, 3D printers, and network gear on a UPS or PDU. UL Listed construction, manufactured to RoHS environmental standards.
Compatible with any device using an IEC C14 inlet. Quick check: desktop PC, monitor, or printer with a 3-pin C14 inlet - Yes; projector, server, or network switch with a C14 inlet - Yes; C7 figure-8 or C5 cloverleaf inlet - No; C20 inlet - No, it needs a C19 cord. The angle is at the C13 end only. For loads under 13A, our 16 AWG right-angle version is the lighter option.
The black SJT jacket is VW-1 flame-rated and rated to 105°C, yet flexible enough to route behind a desk, along a monitor arm, or through cable management. Both the NEMA 5-15P plug and the angled C13 connector are molded over the terminations for strain relief during repeated plugging. Choose 3 ft for a short run to a power strip or 10 ft when the outlet is a long reach away.
Each batch is sample-tested during production for continuity and fit. Manufactured to RoHS environmental standards. If your cord arrives defective or stops working in normal use, Cable Leader handles replacement requests directly - no manufacturer redirects.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.