Cable Leader - IEC C5 Power Cord, Australia AS/NZS 3112 3-Pin Plug, 2.5A 250V 18 AWG for Laptop Charger, Projector, Printer - Black
Model: PW148-12XX
SKU: 13084831
Reviews coming soon
Reviews coming soon
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Lost the mains lead for your laptop brick, or landing in Sydney or Auckland with a US cord that does not fit? This cord plugs the 3-pin flat-pin AS/NZS 3112 plug into any standard Australia or New Zealand wall outlet and the C5 cloverleaf end into the C6 inlet on the power supply. It replaces the cord that shipped with the adapter — no travel adapter stacked on the wall, no loose fit.
Rated 2.5 amps at 250 volts, matching the IEC C5 connector limit, so it covers laptop, projector, and printer power supplies without derating. Three 18 AWG (0.75 mm2) copper conductors including a dedicated earth pin, PVC insulation, and fully molded plug and connector bodies. Carries VDE and ENEC safety approvals, built for the 230-240V Australian and New Zealand mains, and uses RoHS-compliant materials.
Works with any laptop or notebook AC adapter, projector, printer, monitor, or game console power supply that takes the 3-prong cloverleaf plug. Quick check: Australia or New Zealand wall outlet to a laptop brick — Yes. Wall outlet in the US or Canada — No, choose a NEMA 5-15P to C5 cord instead. Two-pin figure-8 (C7) inlet — No. Kettle-style 3-pin (C13) inlet — No. Equipment over 2.5 amps — No.
Molded strain relief at both ends takes the bending and pulling of daily plug-in and packing in a laptop bag. The flexible H05VV-F PVC jacket coils flat for travel and lies neatly under a desk for a permanent setup. Fully molded connectors keep the pins aligned so the plug seats firmly in the outlet and the C5 end stays put on the power supply.
Each cord is sample-tested during production for continuity, polarity, and dielectric withstand. Manufactured to RoHS environmental standards (lead, mercury, and cadmium-free). If your cord arrives defective or stops working in normal use, Cable Leader handles replacement requests directly — no manufacturer redirects.
This IEC C5 power cord connects a laptop power adapter or any device with an IEC C6 inlet to a standard Australia or New Zealand wall outlet. It features a molded AS/NZS 3112 3-pin flat-pin plug on one end and an IEC 60320 C5 cloverleaf (Mickey Mouse) connector on the other, built with 18 AWG (0.75 mm2) 3-conductor copper wire in a black H05VV-F PVC jacket, with molded strain relief at both ends. Rated 2.5A 250V, with VDE and ENEC safety approvals and RoHS-compliant materials. Compatible with any device using an IEC C6 3-pin power inlet, including laptop and notebook AC adapter bricks, projectors, printers, monitors, and game console power supplies, whether you are replacing a lost or frayed cord or packing a laptop power cable for a trip to Australia or New Zealand. Best for: powering C5-inlet devices from AS/NZS 3112 outlets in Australia and New Zealand. Not for: North American NEMA wall outlets, IEC C7 figure-8 or C13 inlets, or equipment drawing more than 2.5 amps.