Cable Leader - IEC C5 Power Cord, Right Angle European Schuko CEE 7/7 Plug, 2.5A 250V for Laptop Charger, Projector, Printer - Black
Model: PW150-12XX
SKU: 13084834
Reviews coming soon
Reviews coming soon
This IEC C5 power cord is the right angle power cord for a laptop power adapter or any device with an IEC C6 inlet, feeding it from a continental European outlet with a 90 degree Schuko plug that sits flush to the wall. One end is a molded angled plug — a right-angle CEE 7/7 Schuko (Type E/F, grounded) that fits German, French, Spanish and most continental sockets; the other is an IEC 60320 C5 cloverleaf (Mickey Mouse) connector. Built with 18 AWG (0.75 mm2) 3-conductor stranded copper wire in a black H05VV-F PVC jacket with molded strain relief, rated 2.5A 250V, with VDE and ENEC safety approvals and RoHS-compliant materials. Compatible with any device using an IEC C6 3-pin inlet, including laptop AC adapter bricks, projectors, printers, and monitors, as an angled power cord replacement for a lost EU power cord or a laptop charger cord for Europe. Best for: C5-inlet devices on Schuko or French outlets where a straight plug would stick out. Not for: North American NEMA outlets, UK, Swiss or Italian Type L outlets, C7 figure-8 or C13 inlets, or equipment drawing more than 2.5 amps.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
The same EU power cord as a straight Schuko lead, with the plug turned 90 degrees so it hugs the wall. Plug the grounded right angle CEE 7/7 Schuko plug into any standard continental European outlet — behind a hotel nightstand, under a desk, or in a wall socket with furniture pushed against it — and the C5 cloverleaf end into the C6 inlet on the power supply. No travel adapter stacked on the wall, no loose fit.
Rated 2.5 amps at 250 volts, matching the IEC C5 connector limit, so it covers laptop, projector, and printer power supplies without derating. Three 18 AWG (0.75 mm2) stranded copper conductors including a dedicated earth path, H05VV-F PVC jacket, and fully molded plug and connector bodies. Carries VDE and ENEC safety approvals for 220V to 240V European mains and uses RoHS-compliant materials.
Works with any laptop or notebook AC adapter, projector, printer, monitor, or small audio power supply that takes the 3-prong cloverleaf plug. Quick check: Germany, France, Spain, Netherlands or Poland wall outlet to a laptop brick — Yes. Wall outlet in the US or Canada — No, choose a NEMA 5-15P to C5 cord instead. UK, Ireland or Switzerland — No. Two-pin figure-8 (C7) inlet — No. Kettle-style (C13) inlet — No. Over 2.5 amps — No.
A straight plug behind a desk sticks out and takes the load every time the furniture shifts; the 90 degree power cord routes the cable down the wall instead, keeping a low profile power cord footprint and taking bending strain off the outlet and the plug. Molded strain relief at both ends, a flexible black H05VV-F jacket that coils flat in a laptop bag, and molded connectors that keep the pins aligned for a firm seat.
Each cord is sample-tested during production for continuity, polarity, and dielectric withstand. Manufactured to RoHS environmental standards (lead, mercury, and cadmium-free). If your cord arrives defective or stops working in normal use, Cable Leader handles replacement requests directly — no manufacturer redirects.