CHAUVET DJ - Mini Strobe LED Compact Plug-and-Play White LED Strobe Light With Adjustable Flash Rate for DJ Parties
Model: MINISTROBELED
SKU: 12645180
Reviews coming soon
Every dance floor needs the strobe. The CHAUVET DJ Mini Strobe LED is the compact, no-fuss flash effect that mobile DJs, bedroom producers, photo booth operators, and house party hosts reach for when they need that punchy, freeze-frame energy without spending hundreds on a full-size unit. At half a pound and barely larger than a paperback, this strobe slips into the smallest corner of a gig bag, mounts almost anywhere on stage, and even tucks inside the hollow sticks of CHAUVET TRUSST for hidden installs. Twenty-one cool-white 0.25W LEDs produce sharp, club-style flashes that read clean against fog, lasers, and moving lights, and they're rated for 100,000 hours of operation so the unit keeps firing show after show. Operation is as direct as it gets: plug into a 120V outlet and turn the dial to set the flash rate anywhere from 0 to 7 Hz, with no DMX cable, no controller, and no programming required. Because the entire unit draws just 12 watts and runs on LED technology, it stays cool to the touch even after hours of continuous strobing, unlike old-school xenon strobes that overheat by the second set. Use one as the lone strobe on a mobile rig, pair two on either side of a DJ booth, or hide multiples inside truss for a stadium-style flash effect. The CHAUVET DJ Mini Strobe LED is built for mobile DJs, bedroom and home studio setups, gigging musicians, school dances, photo booths, Halloween haunts, and event lighting kits that need affordable, reliable strobe punch in a tiny footprint. In the box: Mini Strobe LED and warranty card.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
At just 0.5 lb and 5.1 x 4 x 3.7 in, the Mini Strobe LED slips into the smallest gig bag, fits inside TRUSST sticks, and disappears on stages where space is tight.
21 cool-white 0.25 W LEDs deliver sharp, punchy strobe flashes and run cool to the touch, with a 100,000-hour rated life expectancy for years of consistent performance.
Onboard knob dials the strobe rate from 0 to 7 Hz so operators can fine-tune the flash speed to match the song, the build, or the drop with no controller required.
Plug into a standard 120V outlet and dial in the flash rate to start strobing in seconds, with no DMX setup, no software, and no extra controller to buy or program.
Draws only 12W and stays cool to the touch all night, replacing the heat and power draw of traditional xenon strobes with reliable, gigging-friendly LED operation.