Frigidaire - 450 Sq. Ft. 10,000 BTU Inverter Smart Window Air Conditioner - White

Hello Ellie, based on the Frigidaire installation layout shown in the manual for the Frigidaire 10,000 BTU Inverter Smart Window Air Conditioner (450 sq. ft.), the power cord orientation is: The plug comes out on the right side (when you are facing the unit from the front). - The power cord exits from the right rear/right side of the chassis - When installed in a window, the cord is routed toward the right-hand side of the window frame (from the room view) - This is consistent with Frigidaire inverter window AC designs, where: - Compressor and control components are typically positioned on the right side - cord routing is fixed (not reversible) Bottom line Looking at the air conditioner from the front, the plug exits on the right-hand side, not the left. - Maico

Hi there, Sue! Based on the Frigidaire specifications/manual for the Frigidaire 450 Sq. Ft. 10,000 BTU Inverter Smart Window Air Conditioner (White): - Unit weight: approximately 54 pounds (net weight). - Exterior bracing/support: Yes, exterior support may be required depending on your installation. The Frigidaire installation instructions require that the window opening and mounting hardware support the weight of the air conditioner. For a typical window installation: - The included window mounting hardware/support brackets are used. - A separate exterior brace is not always required if installed in a properly sized, structurally sound window, according to the manual. - If the window frame cannot safely support the unit, additional exterior support (such as a support bracket) may be needed. Because this is a heavier inverter window unit, make sure the window sash, sill, and included brackets can support the ~54 lb load before installation. - Maico

Good day, Aprem! According to the Frigidaire 10,000 BTU Inverter Smart Window Air Conditioner (450 sq. ft., White) installation and service manual, the unit does include internal foam insulation materials, including expanded polystyrene (EPS) / foam insulation components used in specific areas of the cabinet for: - Thermal insulation (to improve cooling efficiency and reduce heat transfer) - Noise and vibration dampening around internal sections However, the manual makes an important distinction: - Any Styrofoam or protective packaging materials used for shipping must be completely removed before installation and operation. - Internal insulation pieces are factory-installed components and should not be removed or modified, as they are part of the unit’s designed efficiency and safety structure. So in short: yes, the unit contains internal foam insulation parts, but they are built-in and not removable, while all packaging Styrofoam must be discarded before use. - maico

The minimum noise level of this air conditioner is 42 decibels adjusted.

Yes, this air conditioner has a sleep mode function.