Customer Ratings & Reviews

I'm one of those crazy people who likes to use their phone without a case because I love the material and look of the bare device. I know PopSockets are super popular, but having never used one before, this specific grip caught my attention for three reasons. 1) SUPER THIN AND LOW PROFILE: It is shockingly thin—less than the camera bump on my iPhone 17 Pro. As in, equal to the bump before you get to the lens thin. As the lens protrude past it. This creates some problems that I’ll list below. This is good because I barely notice it is there and it never comes off when slipping it into my pocket. It’s bad because it’s so thin it doesn't provide any table protection, so I still get the camera bump wobble… it is just less pronounced now. Next, at first, due to the thinness I had a hard time getting my fingers to fit. But this has loosened up a lot since that time and now that is no longer a problem. But does make me wonder if it will just eventually rip seeing as it is plastic. However, in the meantime, I can now reach everything on my screen with just one hand while keeping my phone securely in my hand. Last, deploying the "pop" is easy: just catch it with a fingernail, slide, and it pops out. A simple press returns it to its low profile. 2) MAGSAFE CONNECTIVITY: It attaches to the back of my phone just like any other MagSafe accessory, meaning easy on and easy off. The magnet is strong and takes intention to remove. I also love that it allows pass-through, so I can attach my phone to other MagSafe mounts while the grip is still on (which rarely is the case). However, there's a catch: the pass-through magnet is stronger than the phone attachment. When pulling my phone off a mount, the PopSocket stays behind, and its low-profile design makes it hard to pry off the mount. Additionally, while it claims to attach to flat metal surfaces, since the grip doesn't extend past the camera bump (for my phone), this means it won't mount flush on metal surfaces (due to being off center ruining the magnetic pull) unless you position it so the camera bump hangs off the edge. At which point it works brilliantly. 3) BUILT-IN KICKSTAND: The metal ring around the edge doubles as a kickstand. The hinge is tight, meaning it easily holds the phone up in both portrait and landscape modes, adding a ton of versatility. As you can adjust the angle to be pretty much whatever you want. Having my phone propped up on my desk makes it incredibly convenient to check notifications as I can just look over or quickly tap to see the time. It also improves speaker audio in portrait mode and makes interacting with what I'm reading much easier. Especially, if you’re a student who uses their phone for the textbook or similar. This might be my favorite feature—it gives me the utility of a kickstand without altering the bare feel of my phone. *A QUICK NOTE ON CASES: Even though I prefer going caseless, I did test this with a case on. Interestingly, almost every negative I mentioned above vanishes. The camera wobble is gone and it mounts flush to metal surfaces perfectly. The only issue that remains is the grip staying stuck to other mounts when you pull your phone away. Overall, this is a worthy upgrade. It elevates the phone’s usability without interfering with the aspects I like most about carrying it case-free. Easy recommendation from me. I gave it 4/5 stars simply because without a case it doesn't work perfectly (granted most users have cases). Also, it staying behind on other MagSafe accessories is annoying. However, I would prefer a stronger magnet where it will stick to a metal surface (say a fridge) or the MagSafe accessory vs the magnet being generally weak and not having those problems. Granted the in-between of that is the "goldilocks" zone.

The PopSockets MagSafe Low-Profile Ultra-Thin Universal Magnetic Grip is one of those accessories that seems like a simple variant of a classic product on paper but ends up being a nice evolution from the classic design. I have used classic PopSockets on my cellphones for years, but this version feels much more refined thanks to its slim profile and magnetic design. The first thing that stands out is just how thin it is. Unlike traditional phone grips that add noticeable bulk, this one sits nearly flush against the back of the phone when collapsed. Installation is about as easy as it gets: simply place it on the back of a MagSafe-compatible phone or case and it snaps firmly into place. Despite being easy to remove when needed, I never felt concerned that it would accidentally detach during normal use. The grip itself works exactly as you would expect from a PopSocket. With a quick pull, it expands into a comfortable finger grip that makes holding larger phones much easier and more secure. I found this especially helpful when using my phone one-handed for extended periods of time. One minor tradeoff of the thin design is that the grip mechanism’s structure makes it less rigid compared to traditional PopSockets, which means the phone will droop in some PopSocket mounts. One feature I ended up using more than expected is the integrated metal adapter ring. It rotates smoothly and can be positioned at virtually any angle, making it useful both as a grip and as a kickstand. The hinge for the metal ring is stiff and the ring stays in position firmly at any angle. It has a nice long reach, so even my large phone can stand nearly upright in portrait mode. Another nice surprise is that wireless charging still worked through the PopSocket, so I did not have to constantly remove it when placing my phone on a wireless charger. This was a nice upgrade compared to my classic PopSocket. Overall, this thin, magnetic variant of the PopSocket strikes an excellent balance between functionality and minimalism. The slim design, strong magnetic attachment, adjustable kickstand, and support for wireless charging make it an easy recommendation for anyone looking to improve the ergonomics of their phone without adding unnecessary bulk.

This Pop Socket is designed to be super light and low profile while offering mag safe compatibility for both holding and charging. It also adds a kickstand which is useful if you want to set your phone down and tilt it for easy viewing. This Pop Socket does work very well my only major complaint is that the pop socket is soooo thin, it is like plastic/rubber mesh and I'm not really sure how durable this will be over time. It feels like too much of a tug could easily tear it right off. I have used Pop Sockets in the past and many do prefer them for that ability to have more stability and control while doom scrolling their social media feeds. I only use it when I am actively shooting videos or movies in areas where dropping my phone could be disastrous, like near water or heights. Otherwise I feel like they can be a bit bulky, but this new version is not so, you can keep it connected all the time especially if you don't have a case it works great and keeps the super thin profile of the phone. I used it with an iPhone 15 Pro Max with no problems at all charging or holding on a Mag Safe ring, charger or car mount.

I absolutely love this PopSocket Ultra Thin Grip. I had to get a new phone case since my previous one didn’t work, even though it was a thin case. After getting the new MagSafe case, the PopSocket magnetic grip attached securely right away. The grip is instant, strong, and very sturdy. I also like that it can mount to any metal surface. Another great feature is the metal ring that pops out to hold the phone in either landscape or portrait mode. It’s very stable and doesn’t wobble at all. The plastic grip is easy to pop out and snaps right back in. It also feels soft and comfortable on my fingers. This is a very thin PopSocket which makes it super smooth to slide in and out of your back pocket without getting stuck. Ive been using it daily and it feels just as strong as day one. It’s also really convenient for everyday use, especially when I’m watching videos or taking quick photos. It makes handling my phone much easier overall. If you are looking for something that its thin and strong then this is definitely the PopSocket you need!!

I picked up the black PopSockets Low-Pro Grip for MagSafe for my iPhone 17 Pro Max, and overall, it is a solid accessory that I highly recommend. The biggest highlight is how incredibly sleek it sits against the back of the phone, adding practically no bulk while keeping a very streamlined, flush look. It also feels extremely comfortable in the hand, making it much easier to hold a larger device for extended periods without fatigue, and the kick-out stand is a great bonus. The magnetic strength is fairly average—it holds on securely enough for regular daily use, but it is not the absolute strongest magnet on the market. Cost is a huge point to consider with this one, as I do feel it is somewhat pricey for what you are getting. However, if you are looking for a low-profile, comfortable grip and do not mind spending a bit extra, it absolutely gets the job done.

The newest Popsocket MagSafe Low-Pro Ultra-Thin Universal Magnetic Grip with Adapter Ring is great. I haven't had a popsocket in forever because I was having to choose between Magsafe cases that worked with my vehicle mounts, or having a popsocket for easier holding and viewing, or minimizing the amount of weight and space my phone cases took up, but now I don't have to choose. I set mine up on my DBRAND clear case for my S25 Ultra and it worked perfectly. It is insnaley simple to set up, just open the pack, line up the popsocket with the Magsafe ring on your phone case, and it grips immediately. The grip strength is just perfect to where it feels secure and holding tight, but also if you want to pivot it or pull it off you can without having to fight it or get a tool to pry it off. I really love the slim low profile aspect of it, its claim is about 2.6mm of added height, which in my test was only about 2 credit cards high, thats very thin. Despite the size it still has the basic functions of a popsocket, the outer ring provides a secure one-handed hold, functions as a kickstand for portrait or landscape viewing, and the inner circle pops out for the classic popsocket grip. I'm definitely getting a lot of use from it just from the kickstand ring alone but not giving up my mag grip compatibility is absolutely brilliant, an absolute must have.

Have you been wanting a popsocket without the bulkiness of a popsocket? You are in luck - they’ve made one! This little marvel is great. Super sleek and light, with no bulk. This sits almost flush on the back of your phone. Slides into your pocket without getting caught. This is attached by magnetic (magsafe) and works like a charm. In addition to the popping out grip it also has a kickstand. This really is a well thought out accessory, where it really feels like they listened to their user base to come out with a new and improved product. The kickstand works flawlessly and the grip is great. When you pull it open the inside feels flimsy but sturdy at the same time. I’m not sure how to describe that. It’s a thin rubbery material that obviously is why it’s so flush with the phone. Having a kickstand and magsafe seem mandatory to me so this solves both those issues, plus having the grip is the trifecta. This would make a great gift and if you’re on the fence about the additional cost, I’d say it’s well worth it – this can do more than a standard pop socket and the thinness alone just makes it so much more convenient. I’d say go for it!

It's a perfect product, I loved it. It's thin, light, it doesn't make the cell phone heavier or bigger. It works perfectly to put the cell phone on the table while you watch a video or simply use it to read something. To type with the cell phone in hand too. Super recommended. It also has a magnet to put, for example, in the fridge or anywhere you need to leave it while you read or use something on your cell phone.

I will start off by saying that this is not as bulky or sturdy feeling as the original pop socket. That being said, its very strong and durable anf feels great. I love the outside ring which acts as a kickstand and props up my cell phone. I bought the bright orange one to put on my black case so i can easily and quickly spot it when i lay it face down as i am prone to do. Love it!

Verdict: Wow, we like this pop socket with rotating Magsafe kickstand. It’s essentially everything you need in a kickstand. Unfortunately, it’s too expensive for what it is. First impression. I am not sure if this is a magnetic install only, or if it’s a peel-and-stick. It doesn’t say how to install anywhere that is obvious or noticeable. I tried to remove the plastic cover and almost ruined the pop socket part. Please provide better instructions. Beside the lack of instructions, I actually like that it’s a magnetic install so that you can move from one phone or case to another. Features: It sticks on magnetically, instead of being permanently stuck on a case, that way you don’t throw it away when your case is damaged. You can remove it when you need, or when you change case or phone. I love that it keeps the phone stable to text quickly with one hand. The kickstand that rotates is the best part, and it’s great that it integrates with the pop socket. Magsafe charging is a nice addition. Things I love: - Makes on-the-go texting or checking something on the phone more secure with the pop socket - Very convenient kickstand that rotates so you can use your phone in different positions or angles - Integrated Magsafe charging - It can move to another phone or case due to magnetic installation Things I don’t love: - It’s too expensive! It’s a cool accessory, but there is simply no reason… not in materials, not in quality, not in innovation, not in convenience… that can justify $40 for this gadget. Cases that include a Magsafe kickstand are the same price (or actually less)! I understand that value is in the eye of the beholder, but there should be a balance in pricing based on product cost to make it accessible to most people. - I think there should be a clear get-started card that says "Don’t peel anything! Just pop on your phone magnetically, and you’re done!” I thought this was a peel-and-stick installation, and nearly ruined the pop socket. - I wish the magnet was a little stronger so that when I remove the mag charger, it doesn’t pull the pop socket off. Overall, this is a very neat gadget! In fact, my daughter loves it and my wife wants one. But I am significantly disturbed by the price… which is not average-consumer friendly. I think that at a lower price point, say ~$15, this could be on every phone in America and probably do much more for the manufacturer and intellectual property holder(s).

I got this to compare the OhSnap Stand. I have always liked PopSocket and this works great! I do like the softer, more smooshy feel of it compared to the OhSnap. So far it has been working great on my Pixel 10. I would say the magnets are stronger on the OhSnap, but the PopSocket seems strong enough for what I need.

I had other grips before but this is popsockets most comfortable yet. I really love the ring kick stand. Feels very stable and allows me to stand the phone up vertically and horizontally

This low profile grip checks a lot of boxes. It’s thin. Stays closed until you need it. Removal. Stand works great. You can still place a MagSafe product on top of it. Very comparable to the competitions that’s available. It lost one star because it was not strong enough to hold my iPhone on a metal surface. Competitor products are able to keep my phone locked on a metal surfaces. I love the color choices so will be keeping.

good grip and so convenient with the kick stand . I love this one!!! Definitely recommend this one.

I think pop sockets are a great grip and I have always liked them, this one is no different. In my opinion. It is the best pop socket to date. However, there is one problem with it, which is the outer magnet is too strong as when it is on my phone, and I put my phone on a magnet mount or any kind of magnetic charging pad that pop socket comes off of the phone and sticks to the mount

I love that it is slim and compact. You can use it as a kickstand

It is definitely low profile, it does not even protrude to the camera bump. Easy to hold (although I thought the connecting tissue might break easily it has done extremely well, even with some pressure I applied on purpose). While the documentation indicates that it will not charge through the grip, I find that some of my magsafe charging will actually charge through the grip so that makes it easier. Cons: I don't think my fingers are that big, but I do have to stretch pretty far in its bounds with my fingers. Can be hard to get the flat bottom where you want it to use as a stand. Tip, don't try to do it while it is all closed, move the ring out from the body and use it to shift it to the position you want. Overall this is a great accessory.

Purchased this for fold 8 and with the official slim Samsung case it works fantastic. I can stand my phone in nearly any orientation. But there are some draw backs compared to pop sockets of old. The actual popsocket part feels cheap and plasticky and it's a bit cumbersome to pop it up. It took me a while to get use to how it feels with the new material to wrap my finger around as it's much thicker now. But all in all I'm happy with my purchase and does everything I wanted it to do. The magnetic hold and the metal kick stand are the best things about it. Highly recommend

I can slap my phone right onto the fridge or a gym rack and it doesn't budge.Instead of popping it out, you just nudge the flexible mesh open to slip your fingers in. Plus, the built-in metal ring makes a perfect kickstand for watching videos in either portrait or landscape. It is a bit pricey, and popping it open takes a little getting used to, but it completely solves the pocket bulk issue. Highly recommend!

I found this super useful for my needs. The ring stand was useful for watching videos/reels both vertically and horizontally, and the magnet was strong enough to keep the popsocket attached to my phone all the time. The popsocket itself was a great fidget toy. I think the magnet that lets you stick your phone to fridges, for example, was too strong, and removing my phone would leave the popsocket stuck to the fridge. Finally, this product should be $10 cheaper.