QIDI - Polar Cooler Extruder Cooling System for Plus5, Max4 and Q2, 90 Percent Clog Reduction, 5-10C Cold Air - Gray
Reviews coming soon
Reviews coming soon
Specifically designed and manufactured for QIDI Plus5, QIDI Max4 and QIDI Q2 3D printer, perfectly matching the printer's extruder, throat and consumable inlet. Easy to install without additional modification.
As an active toolhead cooling system, the QIDI Polar Cooler can reduce clogging rate by up to 90%. It adopts an external independent air duct design, delivering directed airflow to the extruder, throat and consumable inlet, effectively preventing heat backflow and solving the problem of nozzle clogging during high-temperature and high-flow printing.
Equipped with a ceramic heatbreak and a new heat dissipation module, it forms a closed-loop of "high-temperature printing + precise heat insulation + forced cooling". Compatible with 370℃ high-temperature nozzles and 40mm³/s high-flow printing, supporting 800mm/s printing speed and 30,000mm/s² acceleration for long-term stable printing.
Cooperating with the QIDI Max4/Q2 65℃ active heating chamber, the Polar Cooler perfectly adapts to various high-temperature engineering materials, including ABS, ASA, PC, nylon, carbon fiber reinforced consumables, etc., expanding your 3D printing application scenarios.
Made of high-quality heat-resistant and wear-resistant materials, the cooling system has strong durability and long service life. The independent air duct design is easy to clean, requiring minimal daily maintenance to keep the cooling efficiency stable for a long time.
The QIDI Polar Cooler is a closed-loop external cooling system that delivers chilled, filtered air directly to the extruder cold side and filament feed path of compatible QIDI printers, preventing the heat creep that causes clogs during long and high-temperature prints. An internal vibration-damped air pump and aluminum heat sink drop the output air to 5-10 degrees C, reducing clogging incidents by up to 90 percent and keeping extrusion consistent across multi-hour jobs. A built-in condensate filter removes moisture before the air reaches the filament, so the air stream is dry as well as cold. The system is printer-controlled via signal cable: enable Extruder Cooler in your print settings and it activates automatically, working alongside the active heated chamber on the Plus5, Max4, and Q2 for engineering materials such as ABS, ASA, PA, PC, and carbon fiber composites. Rated noise is 54 dB at one meter, comparable to a normal conversation. The compact 234 x 92 x 214 mm ABS housing sits beside the printer, and a silicone delivery hose, 12V power adapter, and condensate drain pipe are all included. Monthly cleaning of the built-in dust net keeps the system at peak efficiency.
Learn more >