Light up your computer with this CORSAIR Vengeance RGB PRO DDR4 RAM. It comes as two 8GB sticks so that you get 16GB to hammer through games, and each stick has RGB LEDs that glow and can be controlled from your computer. Each stick of 3200MHz CORSAIR Vengeance RGB PRO DDR4 RAM is carefully selected and screened for high overclocking potential.
Kit of two 8GB DDR4 SDRAM memory modules
For 16GB total memory.
For capable system operation. DIMM is dual in-line memory module.
Up to 3200MHz operating speed
For excellent multitasking capability.
Anodized aluminum heatspreader
Keeps memory cool for efficient operation.
CORSAIR Vengeance RGB PRO 16GB (2PK 8GB) 3.2GHz PC4-25600 DDR4 DIMM Unbuffered Non-ECC Desktop Memory Kit with RGB Lighting
A:AnswerLooking at the specs for the A320m, yes. The A320m does support DDR4 ram. However, this ram requires XMP to run at its full 3200 MHz value, which I see no mention of on the specs for the A320m. If your motherboard does not come with XMP, the ram will be locked at 2133 MHz. If you already have your motherboard, check the BIOS when booting up and see if there is any option to change settings for your ram such as voltage.
In our iCUE software, you can set the lighting to Black and that would turn off the lights. If you have further questions about the lighting, please contact our support team: support.corsair.com
A:AnswerI wouldn’t do it. There’s far better ram out there. I would recommend trydent z neo by gskill 3600 for ryzen 5000 series. But if you’re absolutely in love with this ram then you need to check your motherboards QVL list. Keep in mind that for the Asus X570 tuf it was not on my qualify vendor list. Had issues
Either kit will be compatible with your setup. Please enable memory profile in BIOS after installation. Feel free to get in touch with us if you have any questions: support.corsair.com
The modules are 51mm in height. According to Asus' website, your board should support this memory kits speed. Please be sure to enable the correct speed profile in your motherboard settings.
A:AnswerI built my PC recently and used the Corsair Vengeance RGB Pro and I can almost guarantee they will give you better performance as you have the option to get them at 2666 MHz, 3000, and 3200 MHz. I went with the 3000 MHz and they are fantastic. I would highly recommend these RAM sticks if you are looking to upgrade. Plus the RGB gives your PC a clean look.
Yes, this memory kit would be compatible with that motherboard. However, it is worth noting that this motherboard's maximum supported memory speed is 2400 MHz, while this memory kit is rated for 3200 MHz. You will be restricted to utilizing this memory kit at your motherboard's maximum supported speed (2400 MHz). If you have any additional questions, we'd be happy to help: support.corsair.com