A:Answernona- The door swing can be reversed. If you choose to reverse the door swing, a Reversibility Kit, which includes a new brand badge and hole plugs, would need to be purchased. We hope you find this information helpful.
A:AnswerHi Grace,Depending on the width of your doorway, you may need to remove the doors to move the refrigerator into your home. Also,
the door hinges are factory-installed on the right-hand side. If youwant the door to open from the other direction, you must reverse
the door swing.Please visit https://bit.ly/31mQ76f for more details.Thank you for your inquiry on our Maytag appliances.
A:Answeraldo, thanks for the inquiry. This refrigerator is intended for use in a location where the
temperature ranges from a minimum of 55°F (13°C) to a maximum
of 110°F (43°C). The preferred room temperature range for
optimum performance, which reduces electricity usage and
provides superior cooling, is between 60°F (15°C) and 90°F
(32°C). It is recommended that you do not install the refrigerator
near a heat source, such as an oven or radiator. Hopefully this information is beneficial to you. Thank you for your inquiry regarding our Maytag appliances!
A:AnswerHi powdew, the dimensions of this Refrigerator are: depth 30 5/8, height 65 3/4 and width 32 3/4. Thank you for your inquiry regarding our Maytag appliances!
A:AnswerLinda, on model MRT311FFFH there is one temperature control located in the refrigerator compartment. There is an Airflow Control located in the freezer compartment. Hopefully this information is beneficial to you. Thank you for your inquiry regarding our Maytag appliances!
A:AnswerHello! Model MRT311FFFZ is not Energy Star Certified. We do have model MFI2570FEZ that is Energy Star Qualified. https://bit.ly/3S1H85o We hope this helps.
A:AnswerHello Jenny! We are terribly sorry to hear about your concern. We would recommend contacting Maytag® at 800-344-1274. We are available We are available M - F 8 am to 6 pm est They will be better able to assist you.
A:AnswerHi Tom. When buying the ice maker, ECKMF95, it should have come with the entire kit for the installation including the water valve and tubing. Unfortunately, they do no have separate part numbers since they are to be included with the Ice Maker. We hope this helps.