A:AnswerStill 400x400 mm spacing but...
The Q6 model is completely changed in mounting. The threaded lugs are recessed into the back and there are 4 stand-off tubes in the packet with the remote, manuals, etc. The stand-off tubes create a plane for the VESA mount, even though the back of the TV is curved now. Because the tubes add a good bit of length you will not be able to use 10mm length screws. The screws I used are M8 1.25 pitch 50mm length. Yes 50mm and with a washer under the head it got tight just short of bottoming out. If you do not use a washer or if your mounting hardware is thinner than mine you may need to use M8 1.25 in 45mm length. I chose the cap head or Allen screws in black oxide finish from an ACE Hardware store at 1.79 each. That was the same price as for zinc plated. The washers I got were also black oxide to complement the look. You could use M8 1.25 x 45mm and skip the washers if you by the flanged heads in zinc or stainless or the bright yellow plating that is on most of the grade 5 or 8 hardware.
A:AnswerThe 14 inch spread is there for a reason, stability. Your unit can topple with only 13 inches of base support. That being said, I will beat to death the obvious by saying a wall mount is awesome, and a table below looks quite natural. If not that, consider attaching blooks to the back of the table to make it wide enough for the legs and attach a safety wire to the wall to prevent toppling. Lastly, you can try a third party stand, but make sure it is rated for your TV, and use that safety wire idea too.
A:AnswerI guess it would depend on how bright the room is. Our living room is pretty bright in the daytime with four windows and a french door but we can enjoy the television just fine.
A:AnswerIf you’re thinking about an old twist dial tuner, nope. It has a remote that lets you pick a channel or TV setting. The remote includes voice activation that allows you to tell it what channel you want.
A:AnswerHello stans, I have attached a link below to the specifications of this unit, you will find all available Inputs/Outputs here.
https://www.samsung.com/us/televisions-home-theater/tvs/qled-tvs/75-class-q6f-4k-smart-qled-tv-2018-qn75q6fnafxza/?redir=QN75Q6FNAFXZA#specs
^Britt
A:AnswerThe top pair of VESA mounting holes are 10 inches below the top metal edge. The bottom pair of mounting holes are 12 inches above the bottom metal edge. Setting the wall mount plate center one inch lower than the fireplace frame to ceiling center will make the TV centered on the wall. Be sure to add the sound bar height to the bottom if you have one.
