Questions & Answers

1-8 of 8 Questions
  • Question
    Looking to replace a built in that I have in a Microwave cabinet. The cutout dimensions are 17 1/4 H by 25" wide, though the outside dimesions of the cabinet is 20" H by 30" W, so there is more interior space. Please advise   (1 Answer)

    By bergermeister November 6, 2016.

    Answers
    • Best 
      Answer

      Hi. We would be more than happy to look into this for you . Please email us directly at onlinesupport@sharpsec.com so we may assist. Be sure to provide the model/serial number and your contact information.

      By Sharp Advisor November 6, 2016.

      • Sharp
  • Question
    How to install the trim kit itself and also ventilation system RK93S30   (1 Answer)

    On the trim kit for the Sharp Microwave/convection # R930CS (Trim kit RK93S30) do you need to vent on the sides of the microwave or just on the top and bottom? Thanks,

    By Anonymous December 3, 2012.

    Answers
    • Best 
      Answer

      Sharp recommends at least 2’’ clearance on all sides. Please contact us at 1-800-237-4277 to obtain a design guide for built-ins.

      By Sharp Advisor December 4, 2012.

      • Sharp
  • Question
    What about a trim kit for a Sharp 1000W/R-21LC   (1 Answer)

    By Anonymous April 29, 2017.

    Answers
    • Answer

      Hello, checks were made and unfortunately I am not seeing where we do have a Trim Kit for the R-21LC unit.

      By Sharp Advisor April 29, 2017.

      • Sharp
  • Question
    we are renovating and have a space reserved for a microwave. The cabinet opening is 27 x 16.5 The door on the upper cabinet is very close to the cabinet opening. There is 1.5 inches from the bottom of the cutout to the lower cabinet door. Thoughts?   (0 Answers)

    By mike January 28, 2017.

  • Question
    Can I modify this kit to work on a 27 inch wide cabinet? It looks as though I can cut to vent louvers to size.   (1 Answer)

    By Tomas August 27, 2016.

    Answers
    • Answer

      Hello Tomas, thank you for reaching out to us in regards to your Sharp R930CS microwave. For further assistance with your inquiry, please contact our support center at 877-698-8475.

      By Sharp Advisor August 27, 2016.

      • Sharp
  • Question
    My cabinet opening is 25 1/2 wide, by 20 3/4' high. the r-930cs seems to work, however I want to use the trim kit for this unit without major work to the cabinet. will I have the correct clearance for the unit? This will be a built in NOT a counter top   (1 Answer)

    By HappyHeart August 25, 2016.

    Answers
    • Answer

      Hello HappyHeart, I looked into the trim kits for this unit, and it appears that with the dimensions you provided, the trim kit RK-93S27 should fit. However, we would need to check the depth, as the trim kit requires at least 19 1/2', and we ask that at least another inch to an inch and a half be available for proper ventilation. Please let us know if there are any other questions you may have about this unit.

      By Sharp Advisor August 25, 2016.

      • Sharp
  • Question
    Is this the proper kit for the Sharp Model Number R-930CS-P?   (1 Answer)

    By Ali December 19, 2015.

    Answers
    • Answer

      Thank you for your recent inquiry in regards to the trim kit for your R930CSP. We recommend using the RK93S30M trim kit with the R930SCP.

      By Sharp Advisor December 21, 2015.

      • Sharp
  • Question
    Is there a trim kit for Sharp Microwave #R-1214 Where is it available?   (1 Answer)

    Is there a trim kit for Sharp Microwave #R-1214 Where is it available?

    By Anonymous February 24, 2015.

    Answers
    • Answer

      Thanks for your inquiry! We'd be happy to help with that. Pleae email your contact info to us at onlinesupport@sharpsec.com so we can have one of our Advisors reach out to you. Thank you!

      By Sharp Advisor February 24, 2015.

      • Sharp

Best Buy is not responsible for answers provided by Community Answers, Customers, or other third parties. Accuracy not guaranteed. Terms and Conditions