Customer Ratings & Reviews

Write a Review

Overall Customer Rating

92%of customers recommend this product.

pros

cons

Customer Ratings & Reviews

1-20 of 25 Reviews
    • Brand Response

      AudioTechnica 

      December 14, 2015

      Note that you cannot use BOTH the turntables built-in phono preamplifier and an external phono preamplifier at the same time. If you are looking to boost the sound, select an external phono preamplifer that has more gain than the built-in preamplifer, which is 36 db. Choose a model that provides at least 6 dB more gain to notice any increase in volume. To bypass the turntable's built-in phono preamplifier, place the preamp selector switch on the rear of the turntable in the PHONO position. AudioTechnica

    • Brand Response

      AudioTechnica 

      July 25, 2016

      If the turntable does not turn after the start button is pressed, verify that you have installed the drive belt correctly and that the AC power outlet the turntable is connected to is a working outlet. The drive belt comes pre-installed on the aluminum record platter. Install the platter by placing it on the center spindle, then use the red ribbon that is taped to the top side of the platter as an aide to pull the drive belt over the gold colored motor pulley located in the upper LEFT corner of the turntable at about the 10 o`clock position. The belt DOES NOT go around the white post located on the right side of the turntable at about the 2 o`clock position. AudioTechnica