Customer Ratings & Reviews

Always reliable. Easy to load. Vibrant colors. Love my pixma

Best price around in the size and assortment needed for my Canon printer.

Great ink from Canon makes great pictures last a long time

The capacity is larger for this product, and thus provides a longer life when compared to the standard ink tanks for this series, but I can only moderately recommend this product in light of the additional cost. While I am partially satisfied with the XL capacity (only about equal to the standard capacity tanks on my previous Canon printer), and can certainly recommend it over the very limited standard-capacity tanks in this series, please be aware that capacity downsizing is a contributor to the engineered-waste cost of your ink. For example, consider that all capacities in this series, from standard to XXL must hold ink in the same-sized tanks according to color, so the only difference in actual ink capacity is the amount of ink Canon chooses to put in each tank. By not filling every tank, and by maintaining multiple “sizes,” Canon increases its opportunity to maintain a high level of profit per sale, while passing the overhead of multiple packaging designs and production system costs to the consumer. I refer these added costs as engineered waste, or waste-by-design. As a consumer, every time you pay less to buy a smaller capacity tank, you are not only buying the meager amount of ink in the tank, but the tank itself, and the distinct packaging that allows you to identify it. Since the smaller capacity requires more frequent replacement, you are paying those added production costs over and over again. You seem to be saving because of the lower cost of each tank at replacement, but the opposite is true over time. If every tank could be filled with ink (i.e. at a maximum-capacity XXL level), but with a reduced product overhead, consumers could benefit from lower long-term ink costs by avoiding this one layer of engineered waste. However, at a higher initial unit cost, not everyone can afford maximum-capacity tanks, so Canon responds to demand, and competes for market share by downsizing capacity, reducing price and increasing production costs. This inefficiency thus becomes embedded in the system, and the consumer is forced to bear the added cost of this engineered waste, with the greater burden of that forced on those who can least afford it. The following comments regard a more insidious form of engineered waste that I find common in the printer/ink industry. The opinions are my own, and are based less on precise testing than on common and reproducible observations. In particular, I have been appalled at what I consider to be an engineered waste of ink during new tank installations. I have not tested the following assertions due to the obvious expense, but I suspect that if you replaced all six of the ink tanks in your Canon printer, including these four color tanks, plus the photo-blue and larger-capacity black ink tanks (sold separately), it would make a great deal of difference whether you did so all at once, or one-at-a-time in sequence. The reason for this is that Canon built a substantial amount of waste into the tank installation/ initialization process. Consider that if you installed each tank in sequence, and forced initialization by "printing" a blank page before installing the next tank, and then repeated this process until all six tanks were installed, you would find that each installed tank will have lost an increasing amount of ink, with the least lost in the last tank installed and the greatest amount lost in the first tank installed. I estimate that the net loss on the first tank would stand somewhere between 20% and 25% of the total original tank capacity, perhaps more. This engineered waste takes place without the consumer using any ink for actual printing. I attribute this ridiculous outcome to the needlessly wasteful process of performing a "print-head-cleaning procedure" or something very similar to it, each time a new ink tank is installed. For confirmation of this, notice the sounds produced, and time spent by the printer (depending on printer model), either immediately after the new tank is installed, or immediately before the first page is printed, and compare those to the sounds produced and time required when you run your printer's print head cleaning procedure manually. Also note the amount of ink lost from each tank during either of these actions. If you have ever noticed that ink tanks with adequate capacity before replacing an empty tank suddenly change to a low-ink status after installing a new tank, or similarly, if you have ever noticed a tank with low-ink status suddenly change to an ink-out status after installing a new tank to replace another tank already out of ink, you will understand the reason for my assertions. Only newly installed tank(s) requiring initialization should use ink during this process, but all tanks lose ink. Since this kind of built-in waste generates tremendous additional revenue in ink sales for Canon and other printer/ink manufacturers, I find it difficult not to connect profit motivation with this form of waste-by-design. For these reasons, and taking both kinds of engineered waste into account, I make the following recommendations: 1) Buy the largest capacity ink tanks available within your budget to reduce your total costs attributable to the production-waste expense. Remember, the less frequently you need to replace tanks, the less often you will pay for production waste. Simultaneously, this will increase the total time between installations, and reduce the total number of tank installations to the lowest number possible. 2) Change as many ink tanks simultaneously as possible because the waste of multiple separate installations is greater than the small amount of ink lost on tanks that are already low and especially on those nearly exhausted. 3) Finally, I recommend voicing your displeasure to Canon, and to others as appropriate, on both forms of engineered waste described above. For example, consider questioning how much packaging waste could be eliminated if every ink tank were offered full of ink (i.e., XXL), with savings passed to the consumer at a lower standard-tank cost. Perhaps, if enough consumers of printer ink do this, the manufacturers will come under pressure to make printer ink more affordable for everyone, rather than downsizing quantities to increase sales. Also, consumers should challenge any system of waste-by-design that makes it practical to replace any ink tank before it is empty. Perhaps those involved in such wasteful systems will reconsider the scope of their engineering trespass, and develop intelligent systems that only initialize each tank being installed, and only clean all of the print heads when the benefit of doing so clearly outweighs the cost of wasted ink to the consumer. Hopefully, these ideas will ultimately help you save money on your ink expenditures over time.

I love getting all 4 colors in one package. Even better when I can get the one that also has the large black PGBK ink as well. I can run these cartridges down to the last bit of ink (I just ignore "replace ink" notices).

Great price on the XL cartridges. I always purchase genuine Canon products. Great quality always

Always a good product. Bright color and durable ink.

Easy to install, makes good quality color documents and photos. Only negative is that it is expensive. Wish it lasted longer, too. I bought the XL cartridges this time. hoping they last longer. So expensive!

I have been using Canon inkjet printer inks for many years, and they have never failed to give me spectacular prints. Some of these prints have been framed and have been hanging in lighted rooms for many years without any fading that I can see. This set of ink cartridges have been excellent so far.

I needed ink for my Canon printer and Best Buy always has the package that I need. It was in stock and at my door in two days! Thanks. Oh and the price was good too.

Never expected it would be difficult to find ink for my Canon printer. I was very fortunate to find the ink available on Best Buy.com at an excellent price for a 4 pack of high yield cartridges. Price became even better when I was able to use my points to lower the cost further. Love shopping at Best Buy!

They work as they should and the XL do last longer

great ink, a friend used non canon ink and had issues. i have not as I only use canon ink in my canon printer. I print docs and pictures, all come out great!

Plugged in and working as expected. Quick and easy.

The XL version of these ink carts is well worth the price - especially if you print daily.

Canon Ink is by far the best Ink to use in your Canon Printers the other brands that are cheaper but made to work with your Canon Printer are definitely inferior and cause many problems with printing in the long run. I can't recommend the XL Size enough it lasts a long time. Best Buy is the best place to make this purchase.

It is a great product. Easy to install in my printer and the ink cartridge last long

Factory Canon ink is the way to go. Wish it would go on sale more often.

Good to always have a spare set sitting in the closet.

Canon ink cartridges work the best. I’ve tried off brand and they are terrible. I’m never disappointed with print quality with Canon ink.