Customer Ratings & Reviews

Very easy to install and solid construction. Would definitely recommend it to someone who is looking for a stationary basic mounting bracket.

This mount is just what I was looking for,it work so perfect for my 48" TV,easy to install and easy to manage.great product to buy.love it!

Perfect for low ceiling rooms where tilt isn't needed. Hung a 100+ pound tv with it. It's an 8 year old plasma. Holds very well. Great value!

This is a simple flat TV wall mount that does not adjust for viewing angle, tilt, or swivel. I needed a mount for a 48-inch TV to get it up off the mounts supplied by the TV manufacturer and this works fine. My grandson had already pulled a similar TV onto the floor so I wanted to mount my TV to the wall high enough the toddler couldnt reach it. This worked perfect, easy to mount to the wall and TV seems secure.

I purchased a trio of these mounts at a fantastic price. I have used these to mount a Sony 46" Google TV, a Sony Bravia 60", and a 70" Sharp Quattron panel. The kit includes all of the hardware required to mount most VESA-compatible panels from 40-70", and it may work on models of larger size as well as long as the weight is below 125#. Note that these are fixed flush mounts that position the monitor parallel to the wall. Installation is straightforward & simple provided you follow the clearly written installation guide and carefully locate and mark stud locations. Tools required include a Phillips screwdriver, drill & bit, ratchet & 1/2" socket, stud finder, level, and a pencil to mark the wall locations. I recommend a laser level to make sure you get things perfect. Included with the kit is a nice template of the wall bracket. Once you have decided on a location, tape this template to the wall using a laser level to ensure it is perfectly level. With the template secured & level, use a stud finder to locate studs and carefully mark the center. If the studs are off from the bracket mounting slots, you can move the template left or right until they are properly aligned. The wall bracket need not be perfectly centered as the panel easily slides left or right on the mount to center the television on the wall. Once marked, drill 4 holes, remove the template, and secure the wall bracket to the wall with the 4 lag bolts & washers provided. Two hanger brackets are then attached to the VESA mounting holes on the rear of your panel. These brackets may be adjusted up or down to tweak the final mounting height. The kit includes a variety of VESA mounting screws & washers in common lengths and sizes to accommodate most panels. There are also spacers to handle both flat back & curved back panels. **Note that this mount is relatively flush at just over an inch. If the connectors on your panel come straight out from the back, you may wish to use spacers to provide additional clearance, or obtain right-angle video connectors prior to hanging the television. The hanger brackets have pull-cord lock releases. These are adjustable in length but, on smaller panels, you may wish to shorten them further prior to mounting (or put a rubber band between them) to keep them out of sight. Once the hanger brackets are secure, have a friend assist lifting the panel and hanging it on the wall bracket. The panel locks into place but is easily slid horizontally to tweak the location. The hangers have stops and they will NOT allow you to slide so far that the panel falls off the edge of the wall bracket. You will want to have all of your connections in place BEFORE hanging the panel as there is not much room to work once in place due to the unit's tight fit to the wall. This mount is very sturdy and secure when properly installed. I suggest saving the extra hardware for future panel upgrades. I am very pleased with these mounts.

Not the most expensive mount and is very basic, but it gets the job done and holds up very well. I highly recommend this mount. Easy to mount.

Purchased couple of this item and they were very simple to install. Working as explained and there is no negative surprise. I recommended to my friend and he seemed to like it also.

This is just a basic rack for TV. No tilt or extend but if mounting a TV and leaving it where it hangs is all you need then this works great

This replaced a previous holder. I allowed for more flexibility with the flat screen and space we were working with. Easy to assemble as well.

The bracket is easy to install and adapted well to several different TVs we mounted. The price is higher than Amazon bu the conviniece of shopping local has to be worth something

This wall mounting bracket was easy to install and hang the TV on. Good quality and fairly priced when compared to other similar brackets.

We needed a mount for our living room and our bedroom. This mount works well for us and was pretty easy to put up. More expensive than what I wanted but what're you gonna do?

This mount is solid and was easy to install. There isn't much more to say about this other than follow the instructions for it. Buy it!

Seemed pretty easy, my handy man was able to position on wall with no complaints, while I sipped a glass of wine. Handy man not included.

It was easy to install the only thing is the tv sticks out from the wall farther that I would like it to. But for the price it's great!

I bought a new 55": television at Best Buy and used this stand to place my old 42" television on a spare bedroom wall. The set up was easy and it functions as advertised.

Simple to install. Packaging gives you a variety of screws to use for installation depending on how you want to anchor the stand into your wall. Takes about 15 minutes to do.

I purchased this wall mount for a 60 flat screen TV. It was easy to install and worked well.

Perfect for Super Bowl Sunday. Salesperson was super friendly and very knowledgeable of all the TVs that we were browsing through.

This is the second one we bought, easy to hang with flat screen TV. Have had no issues at all, easy to move side to side of you want to.