Customer Ratings & Reviews

The unit is made of high quality materials and feels pretty sturdy. It's essentially an aluminum surround, with a plastic insert that slides out to hold the M.2 drive, then slides back in and locks in place. Comes with a USB-C to USB-C cable, a USB-C to USB-A adapter, instructions and a self-sticking thermal pad. ***NOTE*** This unit will only fit a SSD WITHOUT an attached heatsink. I recently upgraded to a higher capacity M.2 drive for my PS5 and got this unit to use my old drive in. Unfortunately, since the old drive has an attached heatsink, it was slightly too wide to fit between the internal brackets and was too tall to slide inside the aluminum outer housing. Will return and try to find another option.

It works great! My only concern with it is the fact that it gets extremely hot, especially when transferring large files or folders. As long as it can be kept cool, it works really well.

These work great. I bought two for two spare M.2 NvME drives I had. I get 500-600MBps write speeds, so I’m very satisfied.

Fast, easy to use...and it does what it's supposed to do; what else could you ask for?!

First of all I had my doubts. We were having an issue with a different encloser that wasn't allowing us to get to drive via WD Dashboard software to update the firmware on the drive. Also, it was causing the pc to crash sometimes when searching the drive. Anyway. Got this encloser and we were able to access the drive via the software and did the firmware update. Pure Plug-N-Play. No, more crashing. 31.78°C (89.2°F) on the read and 32.17°C (89.9°F) on the write of a 3GB file. It's idle around 31.11°C (88°F). At 70°F ambient.

Bought this to repurpose an old NVMe drive and it works perfectly. Super easy to install—no tools needed—and it connects instantly with my MacBook via USB-C. Transfer speeds are fast and consistent, and the enclosure stays cool during use. Great build quality and compact design make it perfect for portable storage. Definitely worth it if you need external SSD speed without paying for a prebuilt one. Pros: Easy setup Great transfer speeds Solid build Good cooling

Excellent product and easy to use. I had it ready to go in less than 5 minutes. Plug and play.

Had to increase the size of the NVMe in my pc. Purchased this enclosure to clone the drive and expand the partition. popped in the larger NVMe and cloning away. Was exactly what i needed. Purchased another NVMe and now use it as external storage. Easy to use great product. Life saver...

This little enclosure has been a life saver for my old PCs that needed an SSD upgrade with no slot in the motherboard. Games, and operating system ran flawlessly even with speeds being somewhat reduced with the cable connection and bay. Quite literally doubled my gaming and operating experience anywhere it went. Also, if youre wanting to take your PC with you on the go and have a simple boot with you on any hardware, this is the way to do it.

I was able to use this to clone a HDD over to an SSD. Super easy to use and just works.

Worked great, easy to use. Needed to get some files off the wife's dead computer, so I could reformat her SSD.

This enclosure works great with NVME drives and very fast. Just slot in your drive and youll be on your way to fast data transfers. Be careful not to bend or break the plastic pin that holds the drive down and also use the thermal pad because the drive you use can get very very hot. Fits m.2 drive sizes 2230 to 2280

I needed to transfer storage from 1 m.2 to another and after getting advice from the Best Buy staff I found the perfect item for the job. This product is efficient, easy to use and even comes with heat protectant. Anyone looking for a cloner worth the money, I recommend this one right here!

Purchased this open box and it is in excellent new condition. Our laptop stopped working and with this we were able to connect it to another computer and get all of our pictures and data off so that we didn’t loose out cherished pictures and information. Great value and worked amazingly for our purpose.

This item worked perfect for what I needed. After GeekSquad failed to do what I paid them to, which was back up an old computer, and they tried to charge me a second time to do the same thing they failed to do the first time, I purchased this item and did it myself. Super simple to use and nice and small design so it doesn't take up a lot of room.

The enclosure getting HOT HOT HOT!!! I never close the cover when m.2 is running. Enclosure requires no tools to install m.2. The enclosure comes with very nice multylayer thermal pad that lowers the heat

I had to reduce a star because certain Western Digital uninitialized drives were not recognized by windows or mac computers and needed to use a different enclosure or connect to the computer for initialization before format. Also the instructions could be little clearer for installing the m.2 and the removal of the screw. Once understood, it is easy to use.

Works great but you can’t cover it up or it will get very hot.

It was extremely easy and fast to install my new NVMe SSD into the Insignia M2NVMe enclosure. Performance was excellent. Its push=button makes it easy to open to see what is inside or to replace the case. Price was very reasonable. It is highly recommended.

Giving this device 5 stars because it did exactly what I needed it to do! I have three nvme m.2 ssd’s in my gaming rig, and I was worried about malware contamination on one of the drives. I literally popped them all out and cleaned each drive one at a time using my known-clean laptop. Worked like a charm. I was even able to put motherboard drivers on the windows drive and pre-install the OS before I even put them into my ASUS motherboard! Not sure how well it operates in a daily-use case, but for what I needed; this device was perfect.