Customer Ratings & Reviews

The iOttie Velox Wireless Mini is a good MagSafe charger for the car, however, it is very dependent on your specific car layout. The iOttie Velox Mini is a MagSafe compatible charger that features a vent clip for mounting in the car, a built-in usb-c cable, and a power outlet adapter that can provide up to 7.5W of charging power. This charger is for MagSafe equipped iPhones only, so nothing before iPhone 12, and no Android here. I tested it with my aging iPhone 12 Pro Max. I don't have a USB-C port in my car, so I opted to use the included 12V power adapter, which was a bit of a bummer, because I had to unplug my dashcam to test this, as I only have one 12V port. I would have preferred if the iOttie didn't have the charging cable built-in, and I could opt to use a regular USB-A cable instead, as my vehicle has plenty of those ports free. This issue aside, actually performance was very nice. The strength of the magnet in the charger is perfect, enough to hold the phone in place while not seeming overwhelmingly strong that you can't easily get your phone off. It also provides a seemingly quick charge. When I first tested it, I noticed I was at about 40% charge, and within a short 15 minute drive, I was already over 80%. My only other issue with this charger is something I mentioned earlier, and that is that it will be very specific to the layout of your vehicle. In my vehicle, my vents are a little to close to the driver that I don't really like where it leaves the phone. And the vents are not huge, so my 12 Pro Max pretty much completely covers the vent, to the point it was noticeably warmer when I was using it. However, this will be a personal preference to each person. Just be sure to take note of where your vents are, how big they are, and how big your phone is. Overall, if you take all this in to consideration, this actual performance of this charger is great. I just wish they gave you the option to use a different cable. That is the only thing holding me back from giving it a full 5 stars.

Caught on fire. I had it plugged into my cars outlet, went to lunch and when I came back my car was Smokey. The charger was melting!

I have an iPhone 15 pro. This works perfectly with my MagSafe case. Holds it firm and charges it. Blends in with the front of the car. No needless LEDs or other unnecessary garishness. Easy to set up. Just press it against the air vents and it clips on. Holds firmly. Rubbery coating prevents scratches. It’s very simple but it works. That’s really all one can ask of a charger. They want 1000 minimum letters in this review, but I’ve already covered the main points. It works, looks fine, and achieved what I needed it to do. I need to get a 2nd one for my wife’s car. It’s nice to not have to fiddle with a usb cable that gets tangled or lost. This is just simple “plug and play” and you are ready to go. Really my only “issue” is I wish this had a spare usb port on it. Would just make it a tad more versatile. As it, though, it hits my immediate charging needs so I’m not going to complain. Charging speed isn’t spectacular, but in a 1/2hr of charging from 1% I was up around 20% so not atrocious.

Not to tattle on myself but for years I’ve been driving around with my phone in my pocket, lap, or hand, as I’ve been to lazy of exploring a mount until now. Out of the box, there’s not tons going on naturally and that’s not a bad thing. The device, cord, and power are all connected, thus making setup a breeze. You simply wiggle/jam the prongs through your air vent to hold the magnet up, plug the adaptor into your cigarette lighter on the other end, and you’re good to go. Very freaking simple. The look is modern and sleek as you’d imagine. Nothing sticks out as overly creative or high end, nor should it really so I won’t dock them points for that. The charging works great, I’ve yet to go near an empty to full charge, but I will say that I took a six hour road trip this weekend while my buddy watched three movies on full brightness and sound the entire time as it was plugged in and being held up by the magnet. Not only was I pleasantly surprised that the charge held and never went down, but also that when I took my phone off it wasn’t overheating. Most importantly, to my delight, the magnet held onto the phone totally fine through sharp turns, bumpy roads, brake checks, etc. Never once was I ever concerned that it’d come off the magnet which is arguably the most important feature. The only reason I’m docking a point here is that while easy, I don’t love that the cord is permanently attached on both sides. I’d love to be able to detach the cord at the magnet to be able to only rely on the magnet majority of the time, yet charge my phone when needed. Seeing as I’m normally not seeking a charge, not only do I have an extra cord running through my car display, but now it’s preventing me from using my cigarette lighter for any other device (such as my security cam). All said, that’s a relatively minor issue and I’d still recommend this charger for anyone else with an iPhone 12 or higher and MagSafe capabilities.

I love products from iOttie. I like their stuff a lot. This MagSafe compatible charger is perhaps my favorite thing from them. One issue I've had in the past with any kind of air vent phone holder is that they all too frequently fall off the vent at some point. My last one, also from iOttie, fell as well. Not as often as ones from other manufacturers thanks to a tightening mechanism built in to it. Maybe once every third month. I can already tell after using this for the better part of a week that will not be a problem with this one. When I first took it out of the box I was worried as it didn't have that tightening thing on it. Then I tried to mount it to my air vent. I say try only because the holder thing is already so tight I was halfway afraid I'd break my vent mounting it. I drive for Lyft fairly regularly and this thing has not moved or shifted at all. Impressive. As for the MagSafe part I can report that this holder securely holds my iPhone 12 Pro Max. When I first opened the box I attached my phone to the charger, holding it over my bed, and shook it vigorously and it kept it in place. I do have the Apple Clear Case on the phone and it's designed to be MagSafe compaitible. It keeps my phone charged and does not interfere with the Wireless Apple CarPlay in my SUV which was another thing I was concerned with. The freedom to just hop in my car and wirelessly mount my phone is awesome. The freedom to just grab the phone and go is equally, if not more, awesome. As I've found typical of iOttie products this is an absolute home run.

The iOttie - Velox Wireless Mini - MagSafe Compatible Air Vent Charger is a great improvement in the MagSafe technology as it steps up the hold security by leaps and bounds compared to previous iterations. Strong hold, fast charging, offers security and phone readiness when you need it most. For use in any car that has fin-based air vents, the iOttie holds tight and secure while ensuring you can see your maps or play your favorite songs with just a touch. I found this new model to be a nice improvement related to the MagSafe. My previous iOttie holder would allow the phone to drop and made driving unsafe fumbling around for the phone under my feet. This model holds strong and I have not had it fall yet!! I am a bit disappointed with the clip in the back as it does not have a way to lock it into a position so the phone seems to sag downward overtime. Also, since my car allows for Apple Play, this unit requires having a second cord plugged in to access these features. This is not a flaw as much as it is a bit cumbersome. PROS - iOttie brand, quality, and design - Strong MagSafe hold - Fast charging via built-in USB-C CONS - Back clip sags a bit over time - Not directly compatible with Apple Play

This is great if you have vents to place it on. I just wished MagSafe had a pop socket part that was magnetic and able to do the wireless charging. This is my only thing is that I have to take off my MagSafe pop socket piece to use this. With this though, my only gripe is that the wire is hard wired into the piece. I would have like to see it plug in for those times I don't need my phone to charge, and I can just place the wire into my glove box or something out of the way. Unfortunately, this is not the case. So, the wire just hangs there when not needed. That said, the cord is pretty long. It has vent holes built in to help with heat. The Magnet is pretty strong and holds phone easily without issues, as well as the part that attaches to the vents. I also like the design and looks. Easy to use. Overall, pretty good accessory to have if you have a MagSafe phone case. The only thing I would have changed was having the cord able to detach. And hopefully MagSafe can come up with a compatible Pop Socket magnet part as I love using phone with the Pop Socket.

The charger works very well with any iPhone that has MagSafe charging. The charge cable is plenty long enough the cigarette charger is well made. The vent clip holds the charger firmly in place. Unlike most chargers that must clip to the phone, this charger uses the phones built in magnet to firmly hold the phone in place. It can be used with or without a phone case. If a phone case is used, it must be MagSafe compatible in order for the charger to work properly. The charging surface is large enough to provide a firm surface to connect. Charging time seems right on par with what you get with the standard MagSafe chargers. The color is a matte black that will go well with most car interiors. I have been using in a Jeep and have taking it with me over some very rough terrain. The charger has remained clipped to the vent well and the phone connection is very secure. I have noticed some connection lose with one of my thick phone cases, but it has worked fine with my thin one used most often.

Installation is very easy. You just plug the included 12V USB-C adapter into your vehicle’s socket and then attach the MagSafe holder to the power source. You then push the holder onto an available air vent. The grip on the vent is pretty stable and the magnet holds onto the phone securely. Once you have attached the phone a few times, it gets pretty easy to put it into the right spot and the magnet pulls it out of your hand. The cord is a good length and the profile is low so looks good on the dash. After a few days (and a couple hundred miles due to some longer trips recently), I can share my experience using this mount/charger for hours at a time and minutes at a time. The material for this mount is like a soft plastic/silicone feel. It feels solid and durable. I mean, what do you plan on doing with this thing? It should just be staying inside your car…doesn’t really need to be built like a tank if you ask me. In terms of comparability, it works great with my iPhone 13 Pro Max (even with a MagSafe case on the phone). The phone snaps on and off with ease and feels like it is attached well to the mount. This is confirmed by my hundreds of miles of driving with my phone on this mount. The phone stayed on and didn’t rotate or do anything crazy all throughout my journey. Adjustment is very convenient if you want to tilt/angle your phone a certain way. Now, for the charging aspect of this device. I love the idea of wireless charging implemented into a car mount. I think it just makes sense (coming from someone who has had their phone charge by wire in the car for years). With this device, I find that charging works very well. At the max Qi output of 7.5W, charging speeds were adequate. I am guessing that the phone receiving cool air directly from the air vent behind the mount helps keep components cool and increase charging efficiency (if you’ve ever used a wireless charger you know a byproduct of the process is a decent amount of heat). To give you an idea of charging speed, my iPhone 13 Pro Max went from ~20%-80% in 1.5hrs with maps running the entire time, music playing in the background, and brightness ~70%. I'm a satisfied customer and already recommend to several my friends.

This is a handy little product to store and charge your phone while driving. Picked this up at Best Buy and too a chance on the brand. Never heard of them, but the price was pretty good Packaging was sufficient and fairly east to open without destroying the box The product looked appealing and there was even a Quick Start Guide, in case you have never seen or used on of these Size wise, I would put this on the smaller side. Most that I have used in the past are oval, while this one appears to be a perfect circle, The entire unit is a matte black, with the exception of a decorative gold ring between the charging pad and vent attachment Installing was simple, but I was surprised to not see a lock rick to tighten it down. It worked fine, just not what I expected Also missing was cord guides that you can stick to your dash. The cord is not exceptionally long, so it did not make a huge difference My car has a USB charger, so I did not have to use the supplied lighter attachment The MagSafe magnet was strong, and I do not ever expect the phone to even move on a rough road of speed bump As stated on the box, the 7.5 watt power is plenty to charge an iPhone 14Pro Max. I did not try it with navigation and bluetooth audio streaming, but I assume it would still provide enough juice to give a steady charge Overall a good product with reasonable value

I really like this MagSafe compatible air vent charger. I have tried other models that fit in a CD player or suction onto the car but this is the first one that stays in place without shaking or moving around a lot. And although it is a charger, I think what I like best about it is that it holds my phone in a comfortable and convenient position to be able to use the navigation without having to look down at my cup holder. The charger is very easy to install. Just push it into the vent and it stays put, even when you pull your phone off of it. You can then plug in the USB-C cable directly or use the DC adapter that it comes with. Since my car is older I needed to use the DC adapter. The cord does look a little messy so I pushed mine off to the side so it didn't interfere with my touchscreen. The charging capabilities seem to work well, but for some my phone won't go into standby mode when rotating it sideways. At first I thought it was because the DC adapter in my car didn't have enough power, but for some reason both my kids' phones worked on standby. Oh well, it's clearly a pretty good product if the only negative I have to say is that. It's been nice to have this addition to my car and I would recommend this product to others looking for this functionality.

I’ve observed some case manufacturers that seem to be okay with obstructing the MagSafe charger area with products that protect the camera lenses. This is more of a bad design choice on apple’s part, but I recently had to replace my first on the go MagSafe charger due to its large bulk not allowing the phone to lay flat and charge. The iOttie does not have that issue! I liked the mounting options, and after it’s fitted, it feels solid. The magnet is just okay, which I’m guessing means it matches the strength of the Apple factory magnet. I prefer chargers that hav stronger magnets, as the Apple factory one seems to be able to let loose on bumpy roads or bad potholes, which feels like a liability. The ball Joint t allows you to adjust the position of the phone, but I also feel like it contributes to the unsteady feeling over time. Lastly, 7.5w charging bums me out. If you are taking a phone call and using Apple car play to navigate, 7.5w is not enough to keep my phone turned on, and I would prefer 15w. Overall this product is made decently, it just doesn’t have the right feature set for me.

The iOttie Velox Wireless Mini car phone holder is a paragon of robust design and functional aesthetics, ensuring a secure and efficient charging experience for MagSafe compatible phones, including the iPhone 12, 13, 14, and 15 series. Its dense construction and sturdy grip are indicative of a high-quality build, designed to withstand the test of time. The 12V charger, equipped with a USB-C female port, offers versatile connection options, allowing for direct plug-in to a vehicle's USB-C port or utilizing the charger. The slim cable design ensures neat placement within the vehicle's interior, maintaining a clean and organized look. Additionally, its adjustable position feature and stylish midnight blue color not only add a touch of elegance but also ensure optimal usability. Noteworthy is the ease of installation, which is straightforward and user-friendly, and the stability of the holder, even on rough, uneven roads, ensuring your phone stays securely in place during turbulent drives.

I personally normally don’t like phone stands that hook to car air-vents, but this one is set up so it wedges into the vent and prevents it from pointing down all the time. It still wouldn’t be my first choice because of that, but it works well for what it was designed to do. I just couldn’t find another option that worked for me

Love this for my car! clipped onto my vent. Easy one hand apply/remove phone without hassle of clamps.

Works great. Strong hold. Good charger. Easy to assemble.