Customer Ratings & Reviews

This has been a major upgrade in Wifi at my home. Previous dead spots are not full strength. Using 3 pod system to cover 4 floors in an old colonial house with fireplace and plaster walls.

I was continually having coverage issues with the Netgear Nighthawk AC1750 Router, so after considerable research and reviews I decided to purchase the Velop AC2200 three node system. I did wait until it went on sale at BB! After downloading the Linksys app things moved very smoothly. I had read reviews to setup using the same network name to avoid resetting each devise (8), it helped, Also it was recommended to set up the Wi-Fi first, then any hardwired devises. That worked as well. I did have one problem in that the router did not recognize a devise. I called support, the phone was answered in a timely manner, I could understand the tech person, and they even stood by while I reset a few things. The customer support was excellent! There was even a followup wanting my input on the service. With all that being said, the Velop covers all the previous dead spots. I am very satisfied and I have not been compensated for this review...

I only have a 75/75mbps internet plan but speed testing through wifi I was getting at least 80/85, with other devices running, consistently! Hard wire tests were just as good if not better with 4-7ms latency. Easy to set up. My only mild complaint about Velop was the lack of ethernet ports on nodes (only 2 so I had to buy a gigabit switch for the main router). Aesthetically, looks good, performance and connectivity, great.

I recently bought the Linksys “Velop Tri band mesh wi-if system”, and really like it. We have a large house (4600 SF), and had trouble getting coverage around the house. Have been moving the three receivers around, but finally have GOOD Wi Fi signal throughout the house, with no “holes” in Wi Fi coverage. Fairly easy to set up, good speed and now no dropped pages when walking throughout the house with an IPAD.

Great system. Setup was relatively easy and the coverage/speed is perfect in a 4000 sf home. My only wish would be to have more instructions in the box about setup. I had to setup in bridge mode to work with an existing router, which required a bit of googling. This is a great product to provide complete coverage in large homes. I recommend buying, but do look for it to be on sale.

The setup of the Linksys Velop took longer and was more frustrating than I had thought when I bought it. It is quite finicky and the problem is made worse because you must use the Linksys application to set it all up. I'm sure there are folks that have no problem with the setup, but for them, every step must've gone perfectly. It took me a couple of hours to finally get it to work. Had to restart the setup process multiple times. Also keep in mind that if you have a router currently and you have things plugged directly into it, you may want to consider keeping the router and using it as a bridge, or a hub. Each of these nodes have one port that "theoretically" can have something attached to it, but I couldn't get it to work. Like my Philips Hue lighting hub... Plugged it into one of the nodes and nope... Didn't work. I also have an Xfinity security hub that had to be plugged in. That didn't work either. I setup my old Linksys router as a bridge though, and its working fine. And once everything was setup properly, and all plates were "spinning" at once, I've had zero issues and magnificent router signal throughout my entire house. I really am extremely satisfied with the results.

This product was easy to install. The phone app was quite self explanatory and didn’t take much time at all to get set up. I have still had a few internet problems, but it’s hard to know if that is my internet provider or if this product isn’t fully helping, but regardless I’d say my problems have decreased greatly!!

Increase the Wi-Fi coverage throughout the house. Easy to setup.

Very pleased with this wireless 2 node router. It fully covers a 4000 sq. foot house including the patio . The nodes need to be placed correctly though. I have the main node plugged into a modem and the other is 50 feet away and WIFI connected to the main node. It was extremely easy to set up with an apple mobile device app. It took 5 minutes. I have noted excellent streaming results throughout the house with no drops yet.

The one issue I had with the device was the firmware was of an older version. Spent many hours with tech support to get this resolved. However once it was set up the performance was excellent. We have a spread out house ,ranch, with people using it on both levels basement and first floor. Can handle multiple gaming people on the Internet at the same time without any slow down.

Fantastic product, easy to set up and use. I am able to run my entire household network off of the two nodes. No streaming issues or pc/console gaming issues. A must have product.

Very easy set up Love the included app love checking what devices are connected to my network set up devices with priority and check in my network speed from app

i've using routers and wifi extenders for over 10 years and this is the first arrangement that covers my house at 100% with enough power and speed to consider very close to a direct connection ro my router/switch. I will test the next generation (wifi 6) soon and I hope similar or even better results but as of now we are very satisfied with the performance.

Linksys mesh system is great for my home (over 2200 square feet). Easy to install, these were added as additional nodes to a 3 node system for a total of 6. Some sites indicate you cannot add more than 3; however, all 6 function well and maintain strong signals. App is a great feature to manage your network outside of your cable provider.

I bought the 3-node system to cover the 2500 sq. ft. of the house. Setting that node up was very easy using their app, I did try initially a location that was a bit too far and the system made me move it to a spot that it links up easily with the first node. I now have better range and faster speeds. Would recommend this to a friend

Great solution for a large sprawling house. Recently was called in to a horse farm to help with Internet Access. I bought twos sets of two nodes. From the main modem, to a window, to the barn. They now full speed coverage. Unlike the Google Nest, each of these can be the main node or a secondary node.

I've really enjoyed this since I bought it. It still has some bugs, but overall I have much better coverage throughout my home and am utilizing 5 GHz much better than previously.

A big expense, but I think worth it. I replaced Linksys WRT1900ACS dual band, which was getting unstable (more devices added). I believe this Velop tri band mesh handles the increased number of devices now added to my wifi. It's easy to set up and connect. I've had it for a month, and everything is running well so far. There is occasional no internet, but I think it's due to another source (perhaps a wifi adapter, which has had problems in the past), because wifi shows connected (but no internet). So, I disconnect the wifi and reconnect it, and everything is back to normal with internet. Very easy. Like the extra port on the bottom and cable thread guide. The power plug in is large, so I did get a new bigger power surge power strip to provide more plug-in outlet space. The main cube is connected directly in my main home communications box ethernet port and power in a downstairs utility room. The second cube is plugged into just a power strip outlet at my desk in an upstairs room. The connection process showed it was in a good location for wireless communication. So, it works good in an upstairs and downstairs situation. This was a good investment for me.

Work from home and remote schooling rendered my existing modem/router inadequate for the demands placed upon it. I initially tried a single WiFi range extender, but that product was difficult to set up and could not maintain a reliable connection. I was skeptical of this Linksys system as setup relied entirely on a mobile app, but to my surprise it was completely painless. From start to scratch, everything was up and running in about 30 minutes. I much prefer the look of these devices versus the white discs offered by other brands. My wife and I can now work on complete opposite sides of the house and my child no longer gets disconnected from their online classes. Hopefully the hardware holds up and Linksys continues to provide stable, reliable firmware updates.

Covers my property well which includes an 80 ft + long rancher with attic bedroom and attached garage and a 3 bay detached garage with in-law suite. Occasionally a node drops but usually problem is with the ISP. Discovered there is no way to turn off the 2.4 GHz or the 5 GHz networks independently. I bought an Ecovacs Deebot M88 Robotic Vacuum and can't use the app because it won't hook up with the 5 GHz on. Linksys suggested I hook up another 2.4 GHz router via Ethernet cable to the Velop for just the vacuum to use. Hopefully they'll recognize the error of their ways and write firmware to allow disabling one network or the other. Putting different names on the 2.4 and 5 GHz networks didn't work nor did removing a space from the network names. Can't speak to the connectivity of any other robotic vaccums. I had read on Amazon that someone had got it to hook up by disabling their mesh router's 5 GHz networks and re-enabling the 5 GHz after connecting the vac on 2.4 GHz network alone. Continued to work with 5 GHz network re-enabled