Customer Ratings & Reviews

It did fit great. No issues. As mentioned by someone in the reviews, it is a pair. Installed on a 2012 F150.

Using these to install my new speakers on my 2013 F150 made it super easy to use just plug in play no splicing .

Complete plug and play on my 2005 f150. All you have to do is connected directly to the factory plug and then to the new speaker the entire job could be done under 5 minutes.

I had to replacer Mee the speakers in my 02 F150 with aftermarket ones. Using the adapter made this a breeze, no splicing or joining wires. Fit perfectly in the original plug.

Excellent Product installed by an excellent Tech Noah!!!

they work , they secure snugly , or coded as to what speaker they plug onto + or - , did find the way cheaper on line , but needed them now , and BB was the only place who had them .

The initial harness recommended by BB was the wrong one, so I returned for this one and it worked perfectly. Served the purpose.

If you're replacing factory speakers. Simply use the adapter and there's not wire cutting/splicing required. If you sell your car and want to put the factory speakers back in, simply unplug and put the old speakers back in.

No issues with installation. Would recommend geek sqad install speaker sound great

Wire harness made it a snap to connect my two sets of Pioneer Four Way Speakers to the 2005 Ford Mustang . Good Bye lousy factory speakers!

When you look at these and what they cost it seems a bit high for what it is. The value lies in the time saved using these vs. cutting off connectors and soldering connections. And worrying about polarity. Plug and play!

Worked great in my 2010 Escape. I was able to change the speakers without having to cut/splice wires.

There's no doubt that this was the adapter I needed for my speakers. I did notice it wasn't a nice slide-in fit. The two internal metal plugs inside the black plastic housing were about a millimeter off vertically. So with some tweaking via my fingernail, all was good. I'd advise not to "shove" or "force" the plug hence doing so may permanently damage or compromise it's purpose.

This is a must have for easy installation of aftermarket speakers. I highly recommend you take a moment and ask the tech since these are not on the shelves and you will have to have assistance to buy it.

I used this to connect new kicker 6x8” speakers to my Kenwood in-dash system. Installation was easy and there have been no problems.

After searching town and the internet, I found this kit via search of Best Buy. That was good. Searched the store and did not find it. That was not good... nor the absence of any help in the most appropriate part of the store. A young lady at the checkout counter asked if I found everything I came for. That was good. She searched the inventory, and found the item should be in store... Good again. Turns out they were in the stereo installation shop... not on display... not good, as I had made up my mind the Best Buy site was inaccurate, and likely would have left everything else at the desk. The parts work perfectly.

Part was inexpensive and installed easily. Wish I didn't have to go to several stores to find it but once I got it , installation was a breeze.

These definitely make and install a lot easier. There's no cutting of the factory wires it eliminates the need for you to have to solder the connections. I would highly recommend this for people with new vehicles

The harness Fit perfectly and was very easy to install

I installed new speakers in my 2014 mustang this past weekend and these adapters made the process of installing them extremely easy. As a bonus, it allowed me to leave the car's wiring intact.