Customer Ratings & Reviews

I got this mostly for my Wacom Cintiq 16 and it's awesome! BUT! I strongly recommend you buy the Wacom Cintiq adjustable stand because the screws that it has will fit it to arm on the Cintiq 16. Overall a good product for my Wacom tablet.

Works as described. Bought a second one for my extra monitor and both arms have held strong with no issues.

I can't rate it below 3 stars because I tried to use it outside of what it's specs were. But given the flimsy-ness of the tilt at full tightness, I doubt it could actually hold a 32" screen as advertised. I put a 34" curved on it, rolled the dice and lost. but it VERY QUICKLY started tilting down by the weight and basically had no tension left after a day. I highly doubt it would hold a 32" curved screen due to the center of gravity being shifted out. I was hoping it was "under rated" but they definitely rated it close to what its actual top is. I will say the spring loaded functionality worked well and had no issue with the weight.

Sturdy, hefty arm. Instructions were relatively easy to follow. Some of the joints didn’t move as easily as I wanted it to until I loosened some screws, adjusted the joint position and tightened them up again. It didn’t look like those screws were meant to be adjusted or messed with. I had to get creative b/c my desk doesn’t have enough of a ledge for this mount to sit on and I didn’t want to drill a hole in my desk. The whole point of getting one of these was to maximize working space. I ended up hanging the arm upside down from a 1” thick shelf board on the wall. Keep in mind, the arm is pretty heavy so the board and supporting brackets/screws have to be even sturdier to hold the weight of the mounting arm and the monitor itself. Overall, happy with the way it turned out. The mounting arm itself is good, solid quality. So far it’s held up well and has done its job as expected. The only problem I have is that the arm that actually holds the monitor doesn’t hold it up high enough. I’m not sure if this is gravity pulling that arm down w/ weight, but if I wanted to use a stand up desk and have the monitor up higher to be at eye level, the arm is too relaxed to hold on to the monitor that high.

The design looks cool. But overall is a terrible cheap piece of crap. It was a problem since the moment I opened it. The stupid plastic bezel on the rear mounting bracket never attached correctly. The plastic bezel along the arms are cheap junk that fall off. If you have more than four wires (which isn’t that unusual) the trash wire brackets done even have enough to hold the wires and the bezel won’t slide on. The monitor tilts crooked, no matter what I do. Can’t believe I wasted $80 on this trash. Amazon. It’s probably the same quality.  would definitely not recommend. I would upload pictures but you won’t know what I’m talking about until you see it in person. Plus a mechanically inclined so I know trash when I see it. The person who designed it obviously doesn’t use it. 

I was trying to find arms similar to what I had back in the office for my home, but these are so much better! The cord management covers are easy to remove and, unlike what I had at work, did not break! They are fairly simple to assemble and work as I had hoped. I would definitely recommend them!

Since moving home to work, I needed a monitor arm to help not clutter my desk. This was the perfect monitor arm for my large monitor which the stand took up way too much space. Has helped since it is adjustable and I can move it closer if needed. Great price and easy to install.

the monitor itself is 18.1 pounds and it being held up by the arm. BUT at the angle adjust point that connects the monitor to the arm is slowly rotating downward. I have it as tight as it can be but still doing it. I WOULDN'T recommend for this monitor unless you just like it up high and angle downward.

Very nice and well-made item. I have a glass desk, so I wanted to make certain it would not damage it with installation. It works perfectly. Once I was able to figure out how to properly balance the weight of the monitor with the arm, I was relieved and happy!

Holds up a 34" curved LG screen with no issues. Cable management is good but not excellent.

No real complaints. Everything went together easy and after the last month I have had no problems. It looks better and higher quality in person compared to the pictures here. Price is a little high, but it’s on the high end of reasonable.

Gave me more room to put stuff on my desk and surprisingly good quality 

I love it! I sit with better posture, because my monitor is at the right height. I can also raise it to stand during meetings. Using this arm with an LG 32" QHD monitor. The middle joint has an allen/hex screw that adjusts the tension in the arm for lighter or heavier monitors. If not adjusted properly, it will not hold your monitor in the right position. When I switched between screens, I had to adjust the tension so it wouldn't sag or want to rise up. NOTE if you use the option to clamp this to the back of your desk, your desk must have a 2" deep (back to front) lip for a secure grip. My desk has a skirt, and the lip is only 1.25" deep and it works fine, but I'd prefer more grip.

Very well designed. Gain lots of desk space. I bought one to try it out and works so good got a 2nd for dual monitor setup. Worth every penny. Very flexible. Using in mode where I drilled 1/2 inch narrow hole in desk. Like that it has different mounting options.

We got it from bestbuy.com at good price. Whe we received the item very good surprise. Looking very good, work very good. Easy of install. Take me 5 minutos and we very happy with this product

It's really solid, really sturdy, and works as advertised. It definitely gives you a lot more flexibility in your work flow compared to a default included monitor stand.

I like how the item cleared up a lot space on my desk easy to install instructions couldnt have been more simpler

This holds my monitor well, but I don’t like how difficult it is to adjust it.

Holds my 32 inch Nitro with no issues, has great movement capabilities, and hides the wires.

Overall it is a good arm Mount. Great swiveling for all angles. You will have to crank down the mount base screw mechanism to get it to hold firmly and tighten, Herculean style, the nuts and bolts to get the monitor to hold in position. Was going to return it at one point but gave it a second chance with extra force and it works nicely. I do rotate it from side to side and it holds well.