Customer Ratings & Reviews

pros- -Very nice case with ample airflow - easy to clean -can use 3 fan cards -came with Velcro straps for cable management -240mm rad support -mesh covering any major airways -comes with 2 120mm fans pre installed -cable routings were easy to get connections to where they needed to be cons- -front io usb c might not work with older gen boards that dont support usb3 connections

I recently bought this for my gf’s pc as a gift this christmas & built a budget pc with it. Pros: Price, quality, eazy to disassemble woth thumbscrews, comes with two fans, simple case wiring to plug into motherboard, good placement for clean wire management. Negatives: The bar in the middle can get in the way for larger GPUs

So, the pro's: Great airflow! Lots of room to work with. Mounts for 2.5" and 3.5" disks. Great cable management options and very easy to assemble and install components. Plenty of fan mounts, with many of those allowing for AIO's and custom water cooling. Optional vertical graphics card mount available. Plenty of screws and other hardware included. ---------------------- The cons: So the rest of these are minor gripes, but might influence some of you. The top dust filter is magnetically secured, but the magnets are typical adhesive strip magnets where the adhesive is sometimes not as strong as the magnetic force. Basically, sometimes the strips come off the filter and stay attached to the case. The metallic, umm, strip towards the front of the case, I think it's used as both a mount for a pump and as cable management. Ok some motherboards the bend in the middle can interfere with the USB3, USB type C, and other connectors. It's a white case but comes with black screws. No reset button. That's basically it!

The aesthetic is super clean and thermals are excellent if you alread own 1-2 120m fans for the front. Outstanding for cable management and the perfect size to sit on your desk. Not sure what Turnak is taliing about. I can unscrew everything with a phillips head screwdriver.

recently built my PC using the NZXT H5 Flow case, and I couldn’t be more impressed with its performance. I’m running an Intel i7-12700K paired with an Nvidia RTX 4070, along with a Cooler Master Halo 212 RGB cooler, and this case keeps everything running incredibly cool. Even under heavy load, my CPU never exceeds 60°C, and the GPU stays around 69°C, which is fantastic for high-performance components. The airflow in the H5 Flow is exceptional. The front mesh panel lets in plenty of fresh air, while the overall design ensures that airflow is optimized throughout the case. Cable management is also a breeze with the built-in channels and Velcro straps, making for a clean, professional-looking build. The case itself is sleek and minimalistic, with great build quality. The tempered glass side panel allows me to show off my components while keeping things protected. Plus, the RGB lighting from my cooler looks amazing through the case's transparent panel. Overall, the NZXT H5 Flow is a fantastic case for anyone looking to build a high-performance, cool-running system. It's stylish, functional, and does an excellent job of keeping temperatures low even during intense gaming or rendering sessions. Highly recommended!

Great airflow. Easy to build in.Plenty of room for cable management. Nice white aesthetic.

I got a white NZXT case from Best Buy, and it’s perfect for my build! The sleek design, sturdy construction, and great cable management made the setup super easy. Definitely happy with this purchase!

Very good case. It is overall very well made and sturdy. Made building the pc easy and fast with no problem. The 2 things that weren’t the best were that it did not come with all the fans so you would have to spend a little bit more for those. The other thing is that the glass was a little bit hard to put in and take out. Overall very nice case and I definitely recommend. Note: this was my first build and it made it easy so i recommend for beginners too. Other note: It does NOT come with RGB fans so in the photo those were from my pre built pc.

I’m very new to building PCs and got this case as my first (re)build (brother built my first PC years back and I have been upgrading the hardware, the case being the latest update). From my experience, working with this case was a breeze for someone who only knew the basics. First the negative (so far): The tempered glass panel is incredibly difficult to remove. At times, especially in the beginning, I felt like I was going to shatter it. It is SNUG in its place. If you’re in your computer often, something to consider. EASY FIX: I took a screwdriver and slotted it into the spots where the glass secures in place and wiggled them side to side to loosened them. I did it enough that it was still secure but not a pain to remove. Highly recommend to do this step immediately after taking the glass out. The case itself only comes with 2 fans installed, which may be the norm (I’m new to this). Work this into your budget if you’re limited on funds when building from the ground up. Not a huge negative but: It’s a pretty big case and says ATX for the motherboard size BUT it is compatible with micro-ATX (confirmed on manufacturer’s site before buying). Mine fits in just fine but it just looks almost “empty” by comparison to other builds I’ve seen. More of an aesthetic thing, if you care about that. Also, while it does fit the micro-ATX, make sure that you move the threads that are used to secure the motherboard. I did not do this and learned afterwards. The bottom of the motherboard will dip when trying to attach the various cables and connectors (USB, hd audio, fans, etc.). Positives: Cable management is SO easy with this case. My previous case was extremely limited with the back panel, it really felt like everything was crammed. Everything just fits so well and there are channels for all the different directions cables can go. Minor point but it was something great for me, I like where you can attach the SSDs/HDD in the back instead of the bottom where the PSU is. I don’t have a modular PSU so all the cables I don’t use are just shoved down there, but there was plenty of space below even with the fan near the bottom. When you install more fans (2-120 mm in the front and 2-120 mm on top for my set up) the airflow is extremely effective. I don’t plan to push my system to need to be cooled to an extreme level but I can tell that if you eventually need to build a system to have that option, this would a great case to have it with. Even with all the panels removed, the case FEELS stable. Quality material, sturdy, etc. Plus, it looks very sleek and clean. There can be some pretty wild/unique cases which is great if you want that, but it’s a simple, straightforward design that just fits my needs perfectly. Overall: I’m sure I’m missing points with my inexperience but I’m very happy with this case. Easily a 5 out of 5 for me so far even with the biggest negative being the tempered glass panel. Adjust the spots where the connectors go and it will feel completely different.

Lots of space for larger size graphics cards and a dedicated fan just for the GPU I love NZXT cases

I love the simplicity of those case, almost minimalistic. With NZXT kraken Z63, 3x120mm NZXT RGB fans, this case makes my gaming rig look good, like suit and tie good. With the amount of airflow, the additional 120mm for the GPU is a solid play, love this case for a mid-tower design. Size is perfect!

Great case, awesome airflow, lots of options for mounting SSD’s and hardware. Great cable management system

best case for people whos buildingnot too big gaming desktop. it does have 2 coolers included and can be installed up to 5 which is more than enough. love that magnetic top cover. also main glass door is very easy to remove. love it

In my honest opinion i gotta say i love this tower. I would’ve liked to get my hands of a white one but this one ended up working out instead. This case was really simple to work with and it also comes with 2 fans. The front panel is able to be removed and the bottom has filters that are able to be removed for easy cleaning. I would totally recommend building a pc in this case it’s clean and easy.

Amazing case, good quality. The case Includes two fan and other things like screws.

Love the case. Tinted glass looks awesome. In light rooms, the tint makes the RGB look extra-crisp. Fit a 7900 XTX Nitro+, with room to spare in the front for a couple 120mm or 140mm fans. Have a top mounted CPU radiator (LS520 Deepcool).

This was a great purchase for a first time P. C builder I was able to really follow what was needed. To properly assemble and place my parts with ease and very little instruction. While figuring out the rest, it was a fun process and the Highly suggest it to anyone wanting to join the build your own p c world

I got this case for my sister's PC and we were disappointed to find out it doesnt actually light up at all; the lights in the pictures are all from cooler fans that don't come with the case. It honestly looks pretty plain on its own, but it has good cable management, build quality, and a nice design otherwise. I like the glass panel and it is a pretty sleek, affordable case all things considered.

This case has great airflow, great magnetic filter up top, the fan pointed at the gpu is great for added airflow, Great cable management options along the back. Everything fit nicely with plenty of room.

Great case and a lot of space inside which is good for fans to keep PC cool down. The price is reasonable and affordable