Customer Ratings & Reviews

Quality is top notch - and bought two of them! I was able to fit three-140mm Arctic Fans in the front, one-140mm Arctic fan in the rear and a full 360mm Water-Cooled radiator at the top with three 120mm fans. The RTX 4090, a PNY and Founders Edition GPU with CableMod's wiring fits perfectly with the glass closed. The wiring just barely touches the glass, but enough room for it not to bend. It was really easy mount everything and wiring management tracks makes it easy to clean things up. I removed the HDD bays as I didn't need them. Allowed room for the PSU wiring, but trust me, you can make it work with the HDD bays, it's just going to be a bit tighter. This is one of the few cases I see where the rear is mostly sealed up creating positive pressure. I was afraid this would create turbulence and air pockets where certain components may not get enough air, but given the blower design of the rear part of the RTX 4090 FE GPU, it actually insures it only gets fresh filtered cooled air from the front! My temperatures have improved a lot from my old NZXT H710i. The black case comes with a tinted glass and it is quite dark. So, if you have minimal lighting to no lighting; even on a bright day, you will not be able to clearly see your components. You really do need to have at least the Top Fans to have lighting shining down on your components to see anything. I have attached 3 pictures as I bought two of these (one for work one for personal use). The first two (with Purple light and RTX 4090 FE) only has LED for the WaterPump header and GPU. You can see with the glass on, you can't see anything but the light. The last image (with Green light and PNY RTX 4090) has lighting in the top fans itself shining down; despite the dark glass, with this lighting method you can see the inside better. And also, NO, NZXT will NOT sell you the clear version of this glass to you. They only reserve the glass for warranty purposes.

Recently I heard the company sucks because of NZXT charging huge prices to rent PCs. While that might be questionable behavior, I can say that doesn't apply at all to this case. This N7 Flow case is easily large enough to fit a 4080 SUPER and a Dark Rock Pro 5 CPU fan. The cable management is top notch with lots of cable channels and has dust screens at all entrances. This has been great to catch the cat hair. I have 6 120mm Artic fans that easily remove all the heat. With this case and the CPU fan, the 7800X3D runs at 43C idle and 70C hot. Great! Anyway I would recommend this case for sure if you don't mind it's size.

I got this case as Open Box, and it was like new. The Fans were loosely mounted, but that was all that indicated this case was being unpacked before. Thx to BB for this, a really good purchase. The only gripe I have is a slightly bent front mesh bracket, the is pretty flimsy and not mounted totally flat. Now to the case itself: It is pretty roomy, allowing for two radiators to be mounted simultaneously. Coming from a Lancool II I really appreciate the extra room in the top, enabling me to put my H115i 280mm rad in without the mainboard's VRM heatsinks getting in the way. In the front, I've mounted the 360mm rad of my GPU in a push/pull config (only for the looks, push OR pull alone would have been enough cooling-wise). With the 25mm rad mounted on the outside, it allows to have 25mm fans on the outside as well without the blades touching the mesh - IF the mesh bracket isn't bent, that is (unfortunately mine is, I've helped it with using other screws and washers for the lower fan to push the mesh out slightly). For the GPU I'm re-using my Lian-Li mount that I got for the Lancool II. It does fit when making sure the mainboard is mounted as far away from the back of the case as possible as the bracket is quite thick. Also, I had to leave out the movable part that goes onto the bracket depending on where it is mounted. To give it a bit more stability and prevent sag over time I'm resting the bracket on a fan that is mounted on top of the PSU shroud. This bottom fan is a mod that I created as I was missing some airflow around the chipset, the VRMs, and the backplate of my GPU (which has additional thermal pads so it actually does help with cooling). Since the shroud's hole pattern doesn't match the spacing of a 120mm fan's mounting holes I had to develop an adapter to put a fan there. After printing it I just had to screw it to the fan and then "plug" it onto the shroud. It uses a reverse fan that looks good even though it blows air upwards. The air it gets comes from the front, the PSU is not part of the overall case airflow as its fan is facing down. I really love the looks of the case, and that it makes it easy to build in it. Cable management is great, air flow as well, and the build quality appears to be top-notch, too (well, except for that flimsy front mesh bracket).

Wonderful case. Very easy to work in and looks great when its completed. Airflow is terrific and the size is excellent for the ever growing pgu sizes! I wish they included 3 fans or 0-1 fans. 2 makes it odd to configure fan set up if you are trying to make it look cohesive. I ended up removing both of them and purchasing some other fans. The ease of removing the panels is nice just be careful with the glass. Clean, simple and great airflow!

First of all I was originally looking for a cheap, sub 100dollar replacement case, this H7 wasnt even on my list due to the cost, until a friend mentioned it, and im glad I listened. This case in white and black is an absolutely beautiful case, the all steel, glass construction is heavy, but its a very sturdy case, and the tooless snap together design makes panel removal and filter access so easy. One thing that doesnt get mentioned is the front i/o panel cables are prebundled and routed, this is so nice compared to what ive seen before. Building and routing is almost effortless because of how much room the case has, and the extra space in the back panel, although the included screw set while black and matches with the interior sucks, they are just standard screws, not pan head with hex or anything, kind of annoying especially on the motherboard. Otherwise routing and install was easy, especially with all the cutouts and the center bar. As for cooling my previous case with 3 fans had my 5600x with an oem cooler averaging 80+, and even hit thermal shutdown 95c on one occasion, with this case with 4 fans, transferring my two newer cougar 120 fans and the 2 stock im averaging 64c during games and my higest spike was 74c and this is with PBO enabled at 4.5ghz, so 15-20c drop in average, my gpu has also seen a 10c drop and my case temps are averaging 15 as well, so would i recommend this, definitely YES, as long as you want a sturdy, cool case and dont care about rgb lights, or being able to transport it.

Excellent on all fronts. Incredibly easy to build in (even for a beginner), perfect cable management, and impeccable aesthetics. Size leaves plenty of space for a large GPU. Despite only using the two included fans it keeps fairly cool.

i love this case, the air flow from this case keeps my system on point, currently running with 2 supplied fans and a 240mm aio and no wheres close to overheating, easy to wire up , has real nice cable management channels with Velcro straps. plenty of room for my massive gpu. with my 1000w corsair i still have room for the hdd tray. the screwless panel design is by far the coolest thing on this case, the raised feet make filter cleaning a breeze

This tower has clean lines, slick screw free closure, and outstanding airflow. As a bonus it has ample clearance for modern behemoth GPUs. The built in rear cable management hook-and-loop straps were fantastic to work with to keep everything neat and tidy. I picked this tower up because it was the only one locally available and my old case was no longer viable, due to the length of my GPU and my 4 year old constantly trying to reach inside it. I do not regret the purchase at all.

Beautiful case! Used this in my first PC build, and it was a breeze. Plenty of cable management, and was very simple. Slapped a 360m kraken cooler, a Ryzen 7 7700x and a 7900 GRE into this bad boy and it’s very nice to look at. Went for an all black “stealth” look, and its an awesome addition to my gaming setup.

Amazing case with lots of room. It had really easy cable management and a really nice look.

It has great airflow and it comes with fans. It’s quite heavy and with the contents inside it’s not easy to move. It’s quite spacious inside though so you should be able to fit any components you want inside.

Case quality is excellent. Plenty of space for cable management, nice asthetics, and super easy fan installation with the removable front mounting brackets. Overall a 10/10!

Looks great, lots of space for all the parts. Airflow is fantastic and it makes cable management a breeze

This is the best pc case I have ever had, its super big, well thought out, lots of adjustability, awesome cable management system, SSD/HDDs go in these brackets behind the motherboard and are stuck in place until you want to take them out, beautiful flush and sleek mesh filters with easy access to remove and clean, all screws and overall whole case is built very well not one area was overlooked, very rare to find something these days thats built with care.

This case is a very good value for the money you pay for it. The case is very high quality, and there is plenty of space for cable management as well as for fans and cooling. I have an RTX 3060 Ti and a Ryzen 5 5600X (the 5600X has an NZXT Kraken on it) in this case and the temps are very well managed. It looks good as well, and is super easy to clean thanks to the filters on the front and top panels, as well as one for the power supply, and one on the bottom in the front. It also fits in a computer cabinet very well. Definitely would recommend!

NZXT has left me skeptical these past few years with the disturbingly low standard of quality in some of their products. I needed a larger case for a GPU upgrade in the near future, and I was leery about buying this case, especially at $130 USD. However, I watched some reviews and they were overwhelmingly positive. I figured why not. The case itself feels nice. Unfortunately it is not without its faults. Pros: - Easy enough to build in and requires no tools to take the panels off. - A LOT of room. - Cable management is nice and very convenient. - Airflow is definitely there Cons: - The glass side panel doesn't sit snug against the side of the case and has me worried for the long term. I can press on the top right corner and there's quite a bit of give. - The HDD cage at the bottom is just metal. No shock supports either. I also am not a fan of how to install the HDDs, as the machining didn't line up perfectly, so I stripped some screws. - They did not properly consider the PSU installation. It's 2022 and we still have new cases coming out where you slide it in from the side and have to scrape against the metal cage. Why is there bracket for installing through the back? - For the price, they could have given us four fans. Overall it's a nice case, and I do recommend it if you're looking for something roomy and easy to install in. I just don't think anyone should be rushing out to purchase this.

Clean look, excellent airflow, great cable management for a great price. Does fit a little snug with a massive 4090 graphics card but temps still hold up nicely dispite that. i would recommend this case but would suggest if your building with a 4090 graphics card that you should go with H9 flow instead as it has even more room to breath but all in all im satisfied.

One of my best PC builds yet. Upgrading from a Cooler Master HAF I can say this NZXT H7 Flow raises the game for a decent PC build. The sky is the limit on PC builds it seems these days. But if you want a high end look to your PC build without breaking your wallet, look no further. This case has high end features like good cable management, glass front and high air flow. All the panels are removable and make for a surprisingly easy build. The only thing it's lacking would be a vertical graphics card adaptor and slot. But other than that, this is a great case.

Amazing case for the price, easy to build in and great airflow

H7 FLOW. case only comes with two fans highly recommend you buy your own fans.this case has plenty of space for fit any AIO or big air coolers. case feel strong all panels come off easy but are very secured when installed.my build i have 3 140mm fans on the front,one 140mm fan rear and a 360mm AIO on the top and was very easy to install plenty of room to work in this case very happy and looks very minimalistic. its a big case and heavy when everything installed.