Customer Ratings & Reviews

I’ve been using ohsnap phone grips for around 2 years now. These things are SUPER slim compared to any other phone grip, and the magnet in this thing is strong enough to throw your phone on the fridge or car door. If you have an old vehicle like mine but don’t want to ruin the original look of the stereo, you can buy their wall mount and stick it to a flat surface, use bluetooth, and boom you have a spot for your phone and can click through songs like it’s carplay. “You get what you pay for” is a phrase that is becoming less and less true today, but these guys know what they’re doing. It is so worth it.

This phone grip does it all! Phone grip, mag base mount, kick-stand, and fidget toy all in one. At first I was concerned that it wouldn't be durable enough, but after months of use it is holding up great and works good as new. One of my favorite things is how slim the profile is so you don't even notice it when the grip is pushed in. The mag charger mount is super strong. It will even hold your phone on the side of a metal cabinet! Not a cheap phone grip, but well worth the price.

I was tired of my popsocket getting snagged on my pants pocket. I started looking for a slimmer option. Stumbled onto the snap4. It's not as easily manipulated or deployed with a single hand like the popsocket but well makes up for it with how slim it is! Plus it's mag safe compatible (magnetic). I don't even have wireless charging on my device and I think it's totally worth it. If you have wireless charging, this is even more worth it.

The Ohsnap Grip has completely revolutionized my phone experience, earning my enthusiastic 100% love! Its incredibly thin design disappears into my pocket, yet provides an unbelievably secure and comfortable multi-finger grip that eliminates fumbling. Beyond just holding my phone, it seamlessly transforms into a versatile, multi-angle kickstand, and the fact that it's MagSafe compatible and allows for wireless charging without removal makes it an absolute game-changer. This isn't just another phone accessory; it's a thoughtfully engineered, premium solution that genuinely enhances daily phone use.

I purchased one of these for my Samsung Galaxy S24 Ultra. I really just needed to magnetic ring for Magsafe charging in my car. I didn't even look at the price not really thinking they would be more than a few bucks. When it rang up at $40 I was a bit surprised. I was not too worried about the $40 so I bought it. If it did what it claimed a $40 price point seems OK but a bit high. After securing it to my phone case and waiting 24 hours I tested it. I stuck it to the magsafe and it the 2 magnets really held together great. I pulled the phone off the magsafe and the ring stayed. I email support for help. They did sort of respond. By then I had gone to work and, on my way, home I pulled the phone out of my pocket and no ring. I searched anyplace I recall taking my phone out, but I could not find it, it is magnet, so I guess it was just stuck to something. On my way home I swung by BestBuy to find an alternative. The Manager refunded me without a problem as I am a very frequent and loyal customer. He recommended I buy another of the same and give it a shot with the included sticker that may help. I am now at the point of waiting 24 more hours. I thought the customer service was fair to poor at OhSnap. I feel the product is well designed but poorly executed. When you contact the company they give dropdown menu choices of the issue, and they are primarily "the tape doesn't stick" or some variant of that. It seems too be the biggest issue so why not just get better tape? 3M makes some killer tape that would work great. I think this might have a 3M tape but not one of the better ones. -Product Design and build 4 -Product adhesive 1 -Product function (assuming tape works this time) 5 -Customer support system 2 -Customer Support Reps 3 -Price point 3

I just got mine in the mail and fresh out of the packaging it's definitely as thin as they say. The outer ring certainly feels like metal (though didn't see it say so on their page.) However, the center pop out part is some sort of plastic. The pop out part is super thin as well.. I hate to use the word 'cheap,' but it feels so thin. I almost wish that was metal too (and maybe pull out a quarter inch more too.) Pros: Thin! Charge through and magnetic (with adhesive too!) Cons: Pull out part feels cheap, IMHO should put out just a bit more (though might be a constraint on its size.) Pull put part does not rotate (at least not that I can tell.) So if you intend to use it as a kickstand, you have to rotate it one specific way. If you want to stick your finger into it like one of their examples, you have to rotate it the other direction. You can't do both! (or maybe you can if you have really thin fingers.) I'm going to give it some time to get used to (I'm coming from using the "other" well-known brand grip device for just under 10 years.)

I like how thin this is, and it does help me securely hold my phone. However, the kickstand feature is not great. It most often collapses under the weight of the phone.

This is honestly one of the best grips on the market. I bought it as a gift for my sister-in-law and she absolutely loves it! Her favourite feature is that it's easy to hold and super slim. It's super durable too and has clearly been tested very thoroughly, honestly a top tier design. All the 1-star reviews don't seem accurate at all and are quite odd to be honest. My recommendation is to try out this grip and see for yourself how awesome it is, 5/5 all day!

Best phone grip out there! Allows for MagSafe passthrough for power banks, charging stations, and accessories! The adhessive is reusable so you can take it off and put it on a new phone case! Takes some getting used to but it works great and is easy to use! Its super thin so it doesnt buldge out like some other phone grips! It has a built in kick stand function so you can prop your phone up! The magnets are super strong and even stick to other metal surfaces!

*If* mounted low on the case (I use my pinky for support when holding the phone), I found this to be compatible with my Pixel 8 Pro, in a case, with the Pixel Stand 2nd Gen, and, if I stick the metal plate included with the iOttie iTap 2 Car Mount, (to the mount, not the phone), compatible with the car mount as well. Bought this a little nervous it wouldn't work with my current Android setup, but seems fine. Can't seem to get the wireless charging of the Pixel Stand 2nd Gen to passthrough, if I put the grip higher up on the Pixel 8 Pro where the coil is located. The magnet seems to need more surface area than iOttie Tap 2 magnet provides, hence sticking the metal plate to the iOttie. The kickstand feature doesn't seem to work though, perhaps the phone is too big.

It is pretty expensive compared to similar products. But it is the thinnest I've seen so it sits pretty flush on the phone and does not give you a hard time when putting in pocket or getting it out. It also allows for charge through so you dont need to remove it to use magsafe charging. But it does not accommodate thicker fingers like mine very well.

By far my favorite phone grip I've ever used. I like that there are a variety of ways to hold it,and that I can use magsafe accessories, including chargers, without removing it (this was the biggest downside to my pop socket), that it's low profile when closed, and that I can put my phone on any magnetic surface, like my fridge. The biggest downside is waiting 24 hours after installation to use any magnetic accessories, but it's worth it! The

Magnet holds well. It does work wirelessly which is an advantage over PopSocket, but does feels more flimsy.

Long time pop socket user vs this oh snap. I have to say from a profile and mount perspective this is awesome. The purple color made my wife happy. However. The con of this mount is that it feels flimsy when using it. It doesn’t always flatten out like you would expect it. And when trying to use it as a leaning stand it does not work as expected. We have used pop sockets for years prefer the fixed models. So in short if flat profile is what you want this is a good choice. If durability and function is what you want consider other models.

I like it as a phone holder. It is easy enough to open the button and hold one handed. It is incredibly thin, as advertised. If you are buying this for the dual function of a stand, look at other options. It does not hold the phone up no matter how the button is adjusted. Aesthetically pleasing, ability to use a mag charger with it on and durable. All boxes checked there. Just not a viable stand, unless you perhaps have a 14 mini.

Really like how thin it is and my main reason for purchase was the Qi pass through. Descriptions stated that it was magnetic and would stick to various surfaces, but was pleasantly surprised when it stuck the the rack in the weight room. the pop out portion does seem a little frail, but have not had issues so far.

While I was expecting something of a harder plastic or some type of metal aloy, OhSnaps accessory for my pixel 7 pro is the best! I work in the food industry and ots so convient how the magnets on the back make it hard for my phone to drop, a simple boom,and my phone is sticking to the wall. As far as its extremely slim design as well,it fits perfectly into my pocket. I dont have to worry about the back of my phone,hitting my pocket and falling off as my previous magnetic phone holder did. Its extreme light and when i use it for extended periods of time,my finger doesnt end up swolen or hurting! I appreciate you guys so much!

The frip is nice and comfortable, the mangers work amazing when you attach it, but the problem i have with the frip is that the glue that secures the grip to fhe phone is not strong. The grip has detached off of the phone while using it after 4 months and when i reapplied the replacement glue it came with, it detached after 2 months. Tldr. Grip is great, glue that attaches it to phone is not

There are multiple colors to match the color of your phone. It's not too bulky compared to the pop-up magnet. The magnet is strong. Sometimes, I have tomore smust pull my phone hard to get it off the mount. It allows me to hold my phone more securely. It doesn’t do an excellent job as a phone stand. It’s kind of flimsy. All the pros outweigh the cons.

Have been using the ohsnap for around 45 days and it has been great. I was worried about durability after looking at the reviews but so far so good. I am aware of the limitations of the plastic as some sections of the folding arms are very thin. I am careful not to damage them and make sure they are aligned before collapsing the grip. The functionality is superior to a PopGrip with more grip options and better stand for landscape. Portrait stand was not possible on PopGrip but works with ohsnap. I was searching for a MagSafe grip that works on iPhone without a case. The adhesive assists the magnets and it is so thin you can still attach MagSafe accessories. I do not wireless charge because I prefer to fast charge over Lightning. It would be nice if it was only magnetic to remove easier. The grip needed to be removed once but reattaching was not an issue. I actually liked that the PopGrip was thicker because of the camera bump on the Pro Max. My device still rocks side to side when on a flat surface but prefer the ohsnap overall. My favorite part of this grip is the fidget-ability. I play with the grip constantly! The magnet makes it fun to pop it open and closed different ways. You can spin the grip open or closed or spin your phone. The plastic has been holding up well to all the fidgeting. I hope it does not break but I would probably buy another one.