Customer Ratings & Reviews

I would say it would be good if placed directly to the phone. But if you have a case that has magsafe, it gets pretty hot. Maybe a plain case it would do fine. In my case, Pun intended, it was getting too hot. It didnt really give me the option to pull the snap on and off since it had adhesives to stick to the phone or case. . Overall slim yet pricey. I had to sadly remove the adhesive to make it work on my phone case to pull it on and off so it didnt heat up during charging. Couldnt return since i couldnt return it used.

Seems pricy at first, but honestly it is a must have for MagSafe phones. Wicked thing, none intrusive, works as promised and comes with its own manufacture warranty. For me this beast out the large pop sockets all day long. Can barely tell it is there and it functions with wireless charging. Gonna be buying a couple more for my work phone and family.

Yeah, this is actually good as that commercial that brought you here said. You know which one. It is very slim and is actually fun to use and show off. The way it connects is a little weird. The magnet on the back (for iPhones) by itself won’t hold up entirely. There is an adhesive (sticky goo) on the back which makes it stick and doesn’t come off (unless you’re actually trying and that’s kind of on you if you’re trying). I haven’t had any issues with it. There are some points where the closure doesn’t come out as fluidly as I want. But it doesn’t actually inhibit usage. I can’t speak to other phones but for iPhones it has been really cool. MagSafe products do work. I have the MagSafe wallet the newer one that isn’t leather and is gross and weird…. Not the point, the MagSafe wallet works really well. It seems like it actually is stronger than the original MagSafe magnets. But either way it works and is nice. I do recommend.

This is the absolute best phone grip, and I’ve tried a bunch over the years!!! The OhSnap Grip is super thin, so it doesnt buldge out at all! The magnets make it possible for MagSafe passthrough charging, so you no longer have to take of your phone grip to use MagSafe power banks or charging stations! It even sticks to ant metal surfaces! It takes some getting use to but after getting familiar with it, its super easy to use and I cant see myself using a different phone grip ever again!!! 10/10 would recommend!!!

My absolute favorite phone grip my only complaint is it doesn’t charge on top but of my MagSafe case from Casely . The chargers for oh snap have a lot of complaints of over heating so I just stuck to usbc

Product is so thin, and minimalist yet does the job of hold the phone and doesnt hurt your finger.

I like this product for the limited size it takes up on the back of my phone. Could be softer to the touch where you put your finger. Also when it is in stand mode it isn't that structurally strong, just kind of flows in and my phone falls. Also when your case has magnets in it, and this product that makes your phone magsafe. If you have both then wireless charging is a little on and off. That kind of defeats the purpose if i have to take off this grip to be able to wirelessly charge.

It feels flimsy right off the bat. I like how it functions and the idea of it but it is not durable. Cosmetic scratches accumulated first, then it started folding weird so it wouldn’t always lay completely flat & the stand only worked one direction, and now the top fell of which makes it unusable. For the price I wanted it to last longer than a year but at least it has a year long warranty. IF YOU DO DECIDE TO GET IT: save the order confirmation email, receipt, as well as anything you might need for the warranty. I just requested a new one through the warranty so it might last another 6-7months. Wish it would’ve lasted longer considering the price.

Saw it as an instagram ad at first. Reason I was interested was really because wireless charging works even when it’s stuck on as I have a MagSafe mount in my car. Add in the pop socket esque handle it makes passing time in the bathroom a breeze. And then the kickstand is basically the cherry on top as flying on planes and watching movies or shows is comfortable. I got the black version although I will add that it does seem to scuff not necessarily easy but does eventually and the scratches are noticeable as it basically taking the paint off so you can see the silver under. Other than that it’s durable and cool. Wish it was a little cheaper but it’s cool.

I would give this 5 stars but I always have problems trying to use the stand without phone falling over. Other then that I luv how I do not have to remove it to wireless charge, it fits perfect in my auto phone holder.

Super strong magnet, nice sleek design with almost no additional bulk being added to the phone. I did have an issue with it interfering with NFC and would need to remove it for NFC to work. Not sure if is a combination of using a magnetic case with the Snap 4, but NFC worked fine once I removed the Snap 4 from the case. I do think the product is overpriced for what it is, and it does feel kind of cheap. Unfortunately, there isn't anything else out there that is this thin.

So far the best grip on a phone I’ve used. It’s entirely unobtrusive and never snags on anything - slides perfectly in and out of my pocket. I’ve used pop sockets before but they were too bulky for my liking and this is perfect for me. One thing I will note is if you tend to chew/trim your nails very short you will have a tough time disengaging the magnetic latch to open it. You just about have to have a bit of nail to leverage it up consistently since it sits flush with the magnetic ring.

Installation was quite easy. I was a bit worried initially, because I was confused on how to use it. And while I was trying to figure that out, the center part fell out of the outer part. I was able to see that this part sits in some grooves in the center, and if I stuck it on my phone, the center piece falling out in use shouldn't be a problem. But right out the gates, I was already contemplating bringing the thing back for a refund or exchange. On my magsafe case, it was super easy to install. It just popped on, and I pressed it in. I was a bit worried about using a magsafe charger with this, since several people had complained about the glue coming off or melting, making the grip fall off their phone. I actually don't like using magsafe overnight because I love to doom scroll my phone at night (lol). I typically just use the cable. But in the car, I have a magsafe charger, and I was a bit worried since I do feel the grip getting hot. So far though, no issues with it melting off after a week of use. I will say, I could see if you use a magsafe charger overnight, how the adhesive would melt for those who charge like this daily. The other concern was that due to how light and thin the product is, it feels quite flimsy. So initially I was worried it would break easily. After a week of use and getting used to it, it does seem pretty sturdy despite my initial reaction. We shall see how long this grip lasts! So far so good. But the initial impression definitely threw me off a bit.

I'm loving this phone grip for how thin it is and for the ability to use a wireless charger without having to take it off, like I had to with my old pop socket. Just make sure that you have a magsafe case on your phone, otherwise it will get super hot! Because it's so thin, it does tend to feel a little flimsy, but it is very comfortable and so far it's holding on great.

I absolutely love the OhSnap Product Stand! It's sleek, sturdy, and incredibly functional. The magnetic attachment is strong and reliable, making it easy to snap my phone in place and go hands-free whenever I need to take a call, watch a video, or join a meeting. It’s compact enough to carry around but durable enough to feel premium.

Great grip! It's compact and allows charge through! Convenient stand.

Super slim but very useful. The magnet holds tight to my phone, and the stand makes video calls much easier. It’s nice that it doesn’t add bulk to my case.

Best iPhone grip I’ve used. Extremely thin profile. Super strong magnet. This is the second one we bought

its a high quality and very think grip it works well with original Apple magsafe charger but when I attached my Belkin Qi2 magsafe battery pack it didn't charge. if you don't use magsafe battery pack this is a great option, much thinner than popsocket but if you are a magsafe battery pack user then this won't work for you reached out to ohsnap support, they said they can't promise the pass-through charging functionality on every manufacturer out there

I find how thin this is very nice and the fact that it allows the phones magnet to pass through it very handy. I will say that the magnet itself is almost too strong, it has stuck to other magsafe objects more than the phone itself which is obviously problematic. I would recommend ot as long as you are applying it to a magsafe case and not the phone itself. Use a couple dabs of super glue and put it on the case.