Customer Ratings & Reviews

This is about as much tempered glass as you can get in a case and it's a beauty to behold when all your little RGB LEDs light up. You will see them from every angle. PROs: It's a full size ATX case with plenty of space and places to put cool RGB motherboards, fans, power supplies and graphic cards. Nothing is too big for this case. If you want a full blown water cooled system, you will be wanting this case. I opted for a NZXT CPU cooler and just fans on my graphic card but there is no reason you can make your own fixed pipe system. You have room for up to 12 120mm fans but fret not, you can also go with up to 8 140mm fans and a single 120mm fan. So be prepared to blow a bit on those fans. The case uses for thumb screws (more like wheels) to remove the main glass. The other two (top and front) must be removed with a screwdriver for cleaning but it's quite easy. Cable routing is super easy with ample room behind the system. I recommend with 4 or more m.2 nVME drive slots. You can mount standard SATA drives (SSD or standard magnetic drives) in the back of the case. This case even comes with the option to mount it on the wall like a piece of art. Just how cool is that. And if you like, stow the glass as this can be an open air case if you wish but you will want quiet fans if you opt for this option. The case has the option for a vertical mount graphic card but you will have to get the cable adapter. I recommend you don't as these can cause problems. I have a fancy power supply so I opted not to install the CPU cover. There is plenty of room for two 120mm or two 140mm or one of each, water coolers should you decide to cool both your CPU and GPU. Dust screen are a breeze to clean as they are made of floppy mesh with magnetic edges. Just take them out and rinse them off. The back panel is fully removable with 6 small thumb screws. The case also comes with a really nice graphic card brace if you go with one of the nicer but large GPU cards and don't opt for the vertical mount. It is absolutely beautiful and has so many options. CONs: Yes sadly there are some cons. 1. All that glass is real and thick so it is HEAVY!!! When built, one of the heaviest I have worked on. 2. There is insufficient cooling for the hard drive compartment. It seals up pretty air tight and there is no venting. They should have put some louvers above the hard drives to vent the head but nope. So I recommend you get a good motherboard with plenty of m.2 nVME drive slots. For standard hard drives I recommend USB drives. Both will be faster than standard SATA magnetic drives and run cooler. 3. Like any window, that glass can get dirty fast. With pumping so much air this thing collects dust but the good news is it is fairly easy to clean. Just don't drop the glass. I see a LOT of used cases on eBay with broken glass. But it is good heavy tempered glass so with some care you should be good to go. It's not like this case is going to be portable. 4. At least for my ASUS board, the is no opening where the SATA ports are located. It would have been nice if there was a grommet in between the two you are given but this is minor and if you use USB or the m.2 drives you won't have to worry about this. I highly recommend this case but be prepared to get a work out if you work on your PC often. It's a brute.

Great case with plenty of room for upgrades and fans to keep it cool.

Very beautiful with cover and so cool with no cover, best choice for my gaming room.

Has amazing airflow, itll require a little more dusting than normal but other than that its perfect

excellent case. I really like the versatility of going from a closed, to open and even a wall mounted case.