Customer Ratings & Reviews

First thermal grease I've ever used and I'm very happy with the results. It's taken my refurbished Dell XPS from cooking my thighs down to an expected level of warmth.

I used this on one of my spare computer's processors to attach the heatsink/fan quite a while back, and it's still going strong. Temperatures are still within spec and stable.

Between the Corsair paste BB offers and this TG-7, Thermaltake is the clear winner. TG-7 is easier to apply, doesn't seem to harden, and provides great heat transfer. You can go with this, or probably get scammed by Amazon with some fake 'high-end' paste.

It's a thermal paste. Does the job. Quite well actually. I used it on a laptop that had an idle temp of 70c. Removed the old thermal compounds, applied this and voila! Idle temps are now 35c. What a difference!

We had to replace an internal fan on our desktop computer. The fix requires thermal grease for the new install. After reading some reviews and comparing prices we thought this would be a good choice. It was a great choice!! Easy to use, worked great and the price was low. I would recommend this product to anyone in need of thermal grease.

This product does what it advertises: it transfers heat very well. There is not much difference between the best thermal compound pastes and the average thermal compound pastes because what most tests do not take into account or control is the application of the paste and the amount of force used to hold the Heat Sink to the CPU. These factors can change the result of the performance of a paste so much so, that if two pastes are within 5 degrees Fahrenheit of performance, then they can be said to be equivalent since they are within their bounds of error. With that said, if you really are looking or the ultimate performance in thermal conductivity, you need liquid metal. But if you are looking for a very good thermal paste, then this one does the job perfectly.

This was very easy to use, worked well when it came to performance playing. I would have to say this is like top notch material.

Tried this out on my i7-6700K, I needed thermal grease right away and didn't want to wait 2 days shipping from another site. Works as good as Arctic MX4 and Arctic Silver 5. Well priced and definitely worth picking up if you need TIM in a rush as I did.

Used it to install a Ryzen 9 3900x in my machine as an upgrade from the Ryzen 7 2700x. Temps have been consistent, works as intended. The fact that it's in a tube that you can inject with makes it very easy to apply the thermal paste.

The staff was very helpful in finding the best paste for my computer upgrade. It's easy to use, pretty much mess free, and there is a ton of it left over for future use. I'm very happy with this product and am happy that I used this one over the cheaper one I had used in the past.

Easy to apply and does exactly what it’s supposed to. Temps on my CPU dropped a few degrees compared to the stock paste. A small tube, but enough for a few uses if applied correctly. Great value and performance.

Works as expected. Application is a simple process and cleans up well if you overdue it. This is an outstanding product and would purchase again as well as recommend to anyone in the market looking.

Always be sure to re-apply thermal grease whenever you need to remove your CPU fan. It's super easy to clean up (just don't let it get on the electronics because it's conductive -- be sure it stays between the CPU and the CPU fan). To apply, put just a pea-sized spot in the center of your CPU before placing the CPU fan. If either the CPU or the fan has paste from a previous install, then clean them with a lint-free cloth and 99% isopropyl alcohol (no paper towels). I highly recommend this video because it shows what happens when you use different methods. He uses a clear piece of plastic so you can see how bad the coverage is if you try to spread it around. (So don't bother with the included plastic spreader.) https://www.youtube.com/watch?v=-hNgFNH7zhQ

Excellent product. Easy to apply on the processor and managed to overclock a G3258 to 4GHz using the stock cooler. Temp below 70°C. The only complain is that you don't have to apply a full pack, so it's recommended to have 2 processors to really make use of the one full pack.

I'm not a pro at computers but this was easy to use on my daughters laptop. I had to replace the cooling fan, and while I was at it I removed the heat pipe and replaced the thermal paste on the video chip. Works great :)

Was surprised to see how well an off the shelf thermal paste at my local best buy performed. This stuff does a better job at keeping my original PS3 cooler than Arctic Silver 5, which is a very good paste already.

Had it for about a year now, replaced the paste at least once every 6 month, easy to clean and apply! Not the best performing thermal paste of course, but still very reasonable and affordable for it's price! definitely recommend!

This is a pretty decent paste that does a pretty good job of passing heat. We had to use it in a pinch on some Xeon based servers and it keeps them just as cool as the “special” thermal paste sent by the builder.

Wonderful thermal paste. Does the job wonderfully. I used it on a 12600K and not a single complaint so far. Very easy to apply and store.

I was on kind of a thermal take boycott for a number of years and have been watching their business practices closely. I have sense eased up a bit and have picked up a few of there products not just this thermal paste. For the price you cant really go wrong. 7$ a tube and in store immediate gratifacation, you cant really complain. I had a GPU i figured was dead, but cleaned it up and used this to reseat the heat syncs and now it is working just like it did out of the box. Can say I am impressed but it is still a decent purchase in a bind.