Customer Ratings & Reviews

It didn't work for what I was using it it wasn't competitive with the brand that I needed it for.

I gave this a 1 because I bought it 2 x and both times it broke I thought maybe I tightened too much the 1 st time so I didn’t the 2 nd time and it broke during a wind storm won’t buy another just moved my camera

Not compatible will all cameras listed. Would require modification to work. Returned purchase.

Order 2, one had a missing piece. Decided to return them. They feel made out of cheap material

I just received the Wasserstein Universal Camera Mount, and now have it mounted to one of my Arlo wireless cameras. The mount comes in a small box, and consists of the mount, a backplate, screws and anchors for the backplate, and a connector piece for Blink cameras. The mount comes assembled and consists of a few pieces. At the top is a screw that screws into the rear of the Arlo camera. That screw is attached to a ball located inside the first housing piece, allowing the camera to be rotated from side to side. This piece also has a lock-down screw that, once tightened, prevents any further side-to-side movement. The next piece in this mount also includes a ball that allows you to rotate the camera left or right, up or down, as needed. Once the desired angle is determined, rotating the bottom of this mount clockwise tightens the mount and prevents any further rotation. Last and not least is the very bottom of the base. As I noted earlier, a backplate comes with this mount. The backplate – which has three accompanying screws and anchors – is screwed into the desired surface. Once the backplate is secured, the very bottom of the mount is twisted onto the backplate, locking it against the desired surface (like a wall, ceiling, etc). This mount is very easy to secure and adjust to your needs. It is compatible the following devices: • Arlo Essential Spotlight • Arlo Pro 4 • Blink Outdoor and Blink XT2/XT (an adapter of these is included in the package) • EufyCam 2 / 2 Pro/ 2C • Ring Stick Up Cam Batter and Ring Stick Up Cam Wired For a universal mount, it is easy to work with. Achieving the desired angle should only take a couple of minutes after the backplate has been secured and the mount is screwed onto it. I think this deserves a 5-star review.

The Wasserstein Premium mount is a must have for your security cameras or other smart cameras that have the proper theaded mounting capabilities. The mount is very easy to adjust and move, and stays very solid when put in the position you want. I use it on my Arlo camera which just originally came with a magnetic ball mount, but had limited mounting capability, and poor angles. With this premium mount, I am able to have free range motion of the camera and able to mount in almost any position. I couldn't be happier with it. I highly recommend. It does use 4 screws to mount to walls, which are included. Not one complaint!

Having owned Arlo cameras for a few years now, I’ve bought and used different wall mounts. Wasserstein’s new universal camera wall mount is my new favorite. It’s small, light weight, and you can adjust it in many different ways. Very easy set up in terms of screwing it to the wall, and making adjustments to it, very easy and straightforward. A wall mount is a must if you are worried that your camera might fall, for example Arlo cameras attached to the wall via a magnetic mount. And a wall mount makes it a little bit more difficult for the camera to get stolen.

This camera mount works very well with my Arlo camera. It is easy to mount, is very flexible yet sturdy, and has a very compact form factor. This mount comes with everything needed to install the mount, including wall anchors and a special connector if you are mounting a Blink camera. Once mounted, you can easily adjust and set the camera at a desired angle with ease. With its compact footprint and easy to adjust set up, I definitely feel the Wasserstein camera mount is an excellent alternative to mounts offered by camera manufacturers.

I use Ring video cameras for the majority of my video security system outside of my house. The issue I have always had with them is the included mounts have extremely limited range for adjustments meaning if you don't have the perfect spot you can't get the angle you may need. This mount solves that problem. Thankfully it uses almost the exact same hole pattern as the mount I was originally using and threads right onto my camera with ease. It allows for a much more full range of motion adjustments to get those picture angles exactly right. I was able to correct the angle on a camera that was never able to see as well as I wanted due to a light fixture that is close by. On another one, I got a lower angle so I can now see more of the sidewalk it hangs over and get a better picture of the situation. It's the little things. Installing and adjusting this mount is very simple, and getting everything where it needs to be takes moments. My only real concern is the way it threads on leaves substantially less security for the actual camera as it could be easily threaded off and stolen compared to the original mount. Of course, I would get a pretty clear picture of someone doing so, but its definitely notable. The screw holes get covered up by a nice looking shroud and the whole thing looks classy. I am glad I have this as it solved the small problems I had before. Recommended for anyone who needs a little more wiggle room out of their mounting solution.

This camera wall mount is easy to install and convenient to use. In my experience, surveillance cameras from vendors such as Arlo and Ring often come with mounting hardware that is usually adequate. Where this Wasserstein Universal Camera Wall Mount excels is in the ease and quickness of mounting and demounting the camera. You attach to the wall or wherever you want the camera a 2-inch plastic disk, and the package includes plastic anchors and screws for this purpose. The camera mount itself then attaches by simply placing it on the disk and rotating it clockwise until it locks in place. Rotate counterclockwise to remove. This is similar to the way a smoke detector attaches and detaches from its mount. The camera mount itself is attached to a ball-and-socket arrangement, and the base of the mount can be rotated to loosen the ball and adjust the camera position. Then tighten to hold the camera in position. The camera attaches to the mount via a threaded rod, which is fairly standard for camera mounts, especially camera tripod mounts. The easy mounting/demounting of the camera works well for me because the camera I use is not hard-wired to power but rather has a rechargeable battery. Easily removing the camera when a recharge is needed is an advantage. This camera mount is not expensive, and, if you need one, try the Wasserstein Universal Camera Mount.

This is an awesome wall mount, suitable for so many things. I have mine outside just above a birds nest on my porch, but it even works well as just a tiny tabletop "tripod." It has a universal screw to connect to just about any camera. It comes with wall anchors and screws, so all you need is a drill to install. Quick and EASY!

I love the Wasserstein Premium Universal Mount! Other than drilling three small holes, installation couldn't be easier and anchors and screws are included, although I do feel they appear to be better suited for interior walls and drywall, I used them in brick and they seem to be holding just fine. Overall construction of the mount is solid and it should last for years. I love the flexibility this mount has - it provides full range of motion coverage top to bottom and side to side. Most importantly, it quickly disconnects from the mounting plate so changing the battery in my Arlo Pro 3 camera doesn't require a complete readjustment when I put it back. I give this mount 5 stars and highly recommend it to anyone who has a video/camera system.

The Wasserstien Universal Wall Mount fits anywhere you can put three small screws in. The mount has 2 swivels. The small one moves from 50 degrees left to 50 degrees right. The base moves from 45 degrees left to 45 degrees right. The mount swivel has a lock with a screw. The base swivel is a twist friction lock. I like the fact that I can re-aim my security camera easily with this mount. Installation only took 5 minutes. Everything needed to install into is included in the box.

Solid mount that is sturdy. The package contains the wall mount, backplate, screws, anchors and an adapter if you have a Blink camera. Our eufyCam 2 mounted easily and the range of motion is very good. Installation and position adjustment required about 8 minutes. Very happy with this product as it is more solid than the eufyCam mount.

The mount is well built and is very flexible in the angles and directions the item you are mounting can be set. Once the desired direction and angle are set, the tightness of the setting is great for not getting future movement. Would definitely recommend for easy and flexible mounting options

This mount is well made, sturdy and will definitely withstand the elements. I used it on one of my blink cameras and its much better than the cheap plastic mounts that come with the camera. Because these are so affordable I will be replacing all of my mounts with these. Great buy.

Solidly built and good range of angles available for the camera - only criticism is that something smaller and more discreet would be preferable.

This mount works great with an Arlo camera. The base easily mounts to a wall or ceiling and the body hooks up easily to the base. The camera position can be adjusted to focus exactly where you want to record.

Relatively easy to attache to your camera and wall.

The Wasserstein Premium Universal Mount for Smart Cameras is exactly that - Universal. It plays nice with many of the common security camera brand and models making this mount an ideal option for anyone not wanting to pay for the name brand mark up for their system. I found this mount to be perfect for the Argo Pro and Pro 2 cameras, with easy to install, easy to mount practicality. PROS - Great construction and build for a long lifespan - Truly universal for most security camera brands - Lower cost than brand name mounts CONS - None at this time.