Main Content

ZAGG - InvisibleShield HD Film Screen Protector for Apple® iPhone® SE, 5s, 5 and 5c - Clear

Protect your Apple iPhone SE, 5s, 5 or 5c with this ZAGG InvisibleShield, which features military-grade scratch-resistant material to guard against damage and offers high-definition clarity for a clear view.
$13.99

Item Added.View List

Add to List

    No lists found. Create one today.
    Add Item
    Cardmember Offers
    Frequently bought together
    Subtotal:

    Overview

    What's Included


    • ZAGG InvisibleSHIELD HD
    • Installation card, application solution
    • Owner's manual

    Ratings & Reviews


    Overall Customer Rating:
    88% of customers would recommend this product to a friend (2995 out of 3432)

    Features


    Designed for use with Apple iPhone SE, 5s, 5 and 5c

    For a precise fit.

    Military-grade material

    Offers durability.

    Scratch-resistant design

    Protects your mobile phone's screen on the go.

    Improves grip

    Without adding bulk to maintain a slim profile.

    High-definition clarity

    Ensures a clear view for crisp, vibrant images.

    Apple, the Apple logo and iTunes are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. iPod is a trademark of Apple Computer, Inc.


    Customer rating

    Rating 4.3 out of 5 stars with 3432 reviews

    87%
    would recommend to a friend

    Pros

    Cons

    • Rating: 4 out of 5 stars

      Fantastic. Strong protection for your screen

      Posted
      EhKeeblerElf

      This screen protector is very good. It's very similar to a 3m hood protection you put on car. The material is very strong and is very resistant to scratching. It does not affect the brightness of the iphone 5 at all when installed. I find that it is about 1 mm too short all the way around but it's still fine especially if you are putting it in a case of some sort. I did a good install using the instructions and honestly you have a hard time seeing it. You almost have to look for it when it's installed. To address people worried about installation let me say this. If you are willing to put aside a good 10 minutes, be patient and set up a dust free little area around your phone you will get a good install. To help you out here's what i have done to install these on all my iphones in the past and my iphone 5: 1.) wipe down a 2 foot area on the kitchen counter 2.) put iphone on a fresh dust free towel 3.) i spray a very small amount of windex on the included microfiber cloth and wipe down the iphone screen really really good to take of finger marks/oils and dust. 4.) inspect the iphone screen really good without ever touching it to make sure there's not one piece of dust. Remember even the smallest inconsequential little piece of dust could create a little bubble. 5.) Spray your hands really well with the provided solution to avoid finger marks on the HD protector. 6.) remove protector from package and spray provided solution on adhesive side. I know it seems odd to have a wet screen protector going on your nice electronic phone. Just don't flood it so solution gets in ports. 7.) Carefully position the protector on the iphone and position it for the fit you want. 8.) Important - For a nice bubble free install squeegy from the center of the phone screen outwards to the side. This will give you a great bubble free install. Squeegy comes in the kit. 9.) Important tip 2 - Let phone sit for about 6 hours without turning it on. Two benefits. First, this gives you the best bubble free adhesion. Two, it gives plenty of "curing" time so that you don't get lifting corners on it in the future. Hope this helps.

      I would recommend this to a friend

    • Rating: 4 out of 5 stars

      Quality protective covering, decent fit

      Posted
      Paqrmatt

      If you asked me 1 hour after I installed the Invisibleshield HD on my new iphone 5, I would've rated this product a 1. I was very worried as there were tons of little microbubbles and what looked like light colored air pockets under the cover. But the package said they go away after 3 days. So I told myself to reserve judgement until after the 3 days. By the next morning (about 12 hours), all the bubbles and air pockets were gone. No peeling at all on the edges. I felt much better. Also, I like the way the cutouts are at the top and bottom for the ear speaker/camera and the iphone button. Looks nice. I have only 2 small gripes about this shield, and they are cosmetic for the most part. First, although all the microbubbles and air pockets disappeared as promised, there are what look like very small wavy lines all over my cover. Basically, the cover does not look smooth as glass. Instead are these very small wavy lines. I'm not sure if it's because this shield is a little thicker because of the protective qualities, but if you're looking for guaranteed "smooth as glass" finish, I didn't get one. It's entirely possible I did something wrong in the installation as I haven't read any other reviews with the same problem, but I applied mine exactly per the instructions. The second gripe is that the shield does not go all the way to the edges up to where my case is. I bought a Belkin Grip Candy Sheer "Glow" case (love this case) and there is a little space (on avg about 1-2mm) between where the shield ends and the case starts. I'm not as concerned about this tho. This might be normal in these case shields, not sure as this is my first one, but I thought it should be noted. When the phone is on, you cannot see any of the tiny wavy lines. They are invisible and the picture looks perfect. Overall, I'm very happy with the product. Just don't freak out if the shield looks bad right after you put it on...give it a day.

      I would recommend this to a friend

    • Rating: 2 out of 5 stars

      Looks good at first....

      Posted
      JimM757
      • My Best Buy Premier Silver MemberElite Plus Member

      I was the first customer to walk out of my BB Friday when pre-order iPhones were sold. I got the ZAGG protector based on previous great experiences. The store lights weren't on yest, being they were on a timer. The shield looked good when I left the store.... by noon it looked as though there were clouds under it. Imagine looking at a partly cloudy sky, some beautiful blue sky and some white puffs. I went back at lunch to show the Mobile team, and the lead agreed that something was wrong. He told me that had just received the correct solution which was a lot thicker. He replaced the shield with a new one and it looked great, for a few hours. Now it is partly cloudy again. I'm going back to figure it out. I'll let you know how it turns out. Photobucket

      No, I would not recommend this to a friend

    • Rating: 5 out of 5 stars

      I'm a believer!

      Posted
      TinaF28
      • My Best Buy® MemberMember

      After my husband scratched his iphone 5 after a week of use, I went out and bought him this screen protector. I have always hated screen protectors, and have resisted having one for a long time. My iPhone 3GS went screen protector-less for three years. I have been using my husband's phone for a couple days now and I love this screen protector so much that I have bought one for myself also. The clarity is great, and it is not sticky to the touch like many screen protectors. Honestly, I barely even notice that it's there. Let me address the reviews saying that this was cut crooked. My husband has a black phone and I have the white. With both phones side by side it's obvious why many people think the top cut out is off center. There is a second sensor to the left of the ear piece, which is why there is a gap next to it. With the white phone this black dot is visible, not so much with the black phone. So, to everyone marking it down for this so called defect - ITS NOT CROOKED. Go online and look at a picture of a white iPhone 5 and you'll understand. If you have the black phone, just line it up with the home button and the sides of the phone and you'll be fine. The only bad thing I can say is that I have a very minimal case, so even with the case on, there is still a gap. I love it anyway! Anyway, great cover - can't recommend it highly enough!

      I would recommend this to a friend

    • Rating: 5 out of 5 stars

      Works just as promised and GREAT customer svc!

      Posted
      PrairieBoy
      • Verified PurchaserVerified Purchase
      • My Best Buy® MemberMember

      I couldn't beat the price, though it may have been a closeout price, since this particular model wasn't sold on the Zagg website. I am reviewing a non-glass screen protector for an iPhone SE. I installed it myself with no problem at all (but see caution below). I did not remove the protective cover from my iPhone until ready to install, so there was no dust, but wiped it down anyway. Be sure to cover entire surface of phone with the adhesive. When I was done, it appeared that part of the edge was not sticking. Knowing that was a complaint of others, I called the Zagg customer service in a panic. They offered a complaint number so that if it did not apply as expected, I could order a new one under the guarantee with no shipping costs, and they spent time on the phone answering this and other questions. Zagg customer service is amazing! In the end, once the protector had time to cure, all problems, including the edge, and some minor bubbles, were resolved or disappeared, and I am very happy with the result. NOTE---nowhere does it say this, but when I told the customer service person I had read recommendations to leave the phone off for 6 hours, we said they recommend 24 hours! That's what I did. That means no heat to conflict with the curing process. I would recommend following this suggestion. At least, mine came out beautifully following that suggestion.

      I would recommend this to a friend

    • Rating: 4 out of 5 stars

      Functional Screen Protector

      Posted
      BBVinny
      • My Best Buy Premier Silver MemberElite Plus Member

      Unless you have done it, have the screen protector installed at Best Buy. ($8) It uses a wet application process. Yes, there were bubbles, etc., but they all have disappeared within a day. I use it with a Rocketfish two-tone iPhone 5 TPU case and have anti-scratch protection for my iPhone 5. This screen protector is case-friendly, and there is enough room for the Rocketfish case. I can put my iPhone 5 in my pocket w/o worry of it scratching. I've had it on for one month now, and I'm satisfied with the screen protector. I can fully use touch gestures on my iPhone 5 w/o any problem. The screen is vibrant and sharp. One wouldn't know there was a screen protector unless they really look for telltale signs. (i.e., the exposed space over the proximity sensor.) The only quibble is the price. I still think it's too expensive, even more so when a Best Buy install is factored in. There's a ton of competing products out there and I'm not sure if this screen protector is the ultimate one. For me, it gets the job done.

      I would recommend this to a friend

    • Rating: 4 out of 5 stars

      Great, but could be better!

      Posted
      BibleJeff
      • Verified PurchaserVerified Purchase
      • My Best Buy® Elite Plus MemberElite Plus Member

      I've been an Invisible Shield customer for many years - (long before Best Buy started stocking them in their stores)! For the most part I believe Invisible Shield is "one of" the best screen protection products on the market, but I believe they could be better. Although most of the screen is covered on most devices - the tolerances could be significantly tighter than they currently are! On the front of my iPhone 5s there are several areas that need more protection - #1 - On top of the device near the camera and ear-speaker there is a significant spot without coverage. #2 - @ the bottom of the phone where the fingerprint scanner/button is it doesn't completely surround the button and, simply opens up toward the bottom of the device #3 - If you look @ the sides of the screen there are a few millimeters of screen all the way around that also aren't covered. Summary - Although ZAGG does a good job preventing scratches in general I believe their product "could" be better. I recently went to an "unnamed" store in a local mall that has a similar product, and was EXTREMELY impressed with their product! It has identical protection, but with a MUCH TIGHTER fit around speakers, camera lenses, and around the edges. Not only did they cover the front, but also the back, and the sides! Only customer feedback will push them to provide an even better "Invisible Shield"!..

      I would recommend this to a friend

    • Rating: 1 out of 5 stars

      More Pain than Gain

      Posted
      Fabian
      • My Best Buy® MemberMember

      I was initially very happy with my decision to purchase an Ultra HD screen protector for my HTC ONE. You first began to loose my love for this product after a few weeks of use because the screen protector started to become littered with lots of little indentations. This took away from the overall aesthetics of my phone and bugged me a little bit every time I used it. (- 1 Star) Six months after the screen Protector was placed on the phone by a Best Buy Employee, one of the corners began to peel off. After this took place the phone cover became a nuisance and negatively impact the performance of my phone. (-1 Star) The selling point that initially caused me to purchase this product was the fact that it had a free life time replacement guarantee. So when the corner peeled off the phone, I made my way down to the local Best Buy and was promptly told that they can't replace the product, specifically that I would have to send it in to ZAGG and deal with them myself. (-1 Star) Lastly if you are going to guarantee your product to last for the lifetime of the phone, don't charge people shipping and especially handling costs. Make a product that can last a lifetime or don't guarantee it. Simple as that. (-1 Star)

      No, I would not recommend this to a friend




    Product images, including color, may differ from actual product appearance.