Cable Leader - Cat 6 Ethernet Cable, Non-Booted 24 AWG RJ45 Patch, Gigabit for Patch Panel, Switch, Server Rack, Router - Yellow
Model: C6102-XXXX
SKU: 13132550
Reviews coming soon
Reviews coming soon
Wiring a crowded patch panel or switch where every millimetre counts? This Cable Leader non-booted Cat 6 Ethernet patch cable, also sold as a Cat6 LAN cable, internet cable or RJ45 network cord, drops the bulky boot so plugs sit side by side in high-density ports and air moves freely through the rack. It uses four twisted pairs of 24 AWG bare copper in a 6.2 mm PVC jacket, tested to 550 MHz, well beyond the 250 MHz the Cat 6 standard asks for, with 50-micron gold-plated RJ45 contacts. Compatible with any RJ45 port on Cisco, Netgear, TP-Link, Ubiquiti, Linksys, ASUS, Synology and QNAP gear. Carries high speed Gigabit Ethernet up to 100 m and fits any Cat 5e, Cat 6 or Cat 6a jack, Cat6 and Cat6a patch panels alike. Stocked in 6 inch to 100 ft lengths, including 3, 10, 25 and 50 ft, from short patch cables to long Ethernet cables between rooms. Best for: patch panels, network switches, server racks and structured cabling. Not for: cables unplugged often (no latch protection), plenum or riser runs, or outdoor use.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Four twisted pairs of 24 AWG bare copper, not copper-clad aluminum, tested to 550 MHz against the 250 MHz the Cat 6 standard requires, in a 6.2 mm PVC jacket. Carries Gigabit Ethernet to 100 m with 50-micron gold-plated RJ45 contacts on both ends.
Without a molded boot the plug body is only as wide as the RJ45 itself, so neighbouring cables seat without crowding each other on a 24- or 48-port switch or patch panel. Less plastic at the port also leaves more room for airflow through a packed rack.
Works with Cisco, Netgear, TP-Link, Ubiquiti, Linksys, ASUS, Synology and QNAP switches, routers and NAS units. Quick check: Patch panel to switch - Yes. Rack or cabinet wiring - Yes. Cables unplugged daily - No, choose a snagless cable. Plenum or riser run - No. Outdoor - No.
A non-booted plug leaves the latch exposed, which is the trade-off for a smaller footprint. That suits permanent patching inside racks and cabinets, where cables are plugged in once and left in place, rather than desks where cords are moved and pulled often.
Each cable is sample-tested during production for continuity and wire map. Manufactured to RoHS environmental standards. If your cable arrives defective or stops working in normal use, Cable Leader handles replacement requests directly, no manufacturer redirects.