would recommend to a friend
See more imagesHighly rated by customers for:
TestMan Posted
I’ve used this speaker wire to set up my home entertainment system. The size and color of the speaker wire allows it to blend in quite easily. Cutting and sizing the wire during installation was a breeze. My home entertainment system sounds great. Good product.
Kenny Posted
As a beginner, with no wire cutters but scissors, I believe this was by far the most easiest to strip to get the bare copper wires with the most minimal loss. It not only looks great, but it also has one side of the wire marked to be able to tell which wire is which to match with the speaker you are putting it to. The other copper ones I've got were so hard to strip, that I would always lose some copper when pulling the plastic off or accidentally cut the entire thing. With these, you can just use scissors to cut a spear-shaped end as close as possible to the copper showing and slice the top and bottom just enough to show the copper, and then grab either side of the plastic and peel back like a banana, and cut the loose ends that were peeled. You should have almost 100% of the wire still intact. This is pricey though, so I recommend just doing this for your far-reaching speakers that will show across your room, and use regular non-flat copper wires for the speakers closest to the TV.
PaulieTattooer Posted
I have a “budget” vintage audiophile system. Marantz, Altec, etc. on a vintage wall mounted rail system. They lay flat enough I can snake them behind some pretty tight gaps. I use the shortest runs I can and hadn’t noticed any crossover noise. Not high end cables by any stretch BUT solid enough and insulated enough to get good to upper range of decent sound quality without Crossover buzz or HF dropout in shorter runs.
Justin Posted
Seems like high quality wire. In-wall rated. lays flat, but a little bulkier than expected.
Cheetahman Posted
Needed a flat speaker wire that I could lay under my big floor rug on wood flooring that would also be easy under foot if stepped on (barely noticeable). Lays nice and flat and my audio system sounds excellent. Great under full carpeted floors as well.
CharlieGoBlue Posted
I ran it through my attic to reach the front and back of the media room and it works great. Sound is better than before which was with the thicker wires. Less punch through the walls too and easier on fish pole going down the walls.
Technerd Posted
I was using the Monster Cable superflat cable and ran out so I purchased the Rocketfish cable at the local store. The Rocketfish was much more affordable with some pros and cons compared to the Monster Cable. I liked that the Rocketfish is more neutral white in color vs the more crème color of the Monster Cable. This blends in a bit better with the baseboards if you're not painting. Additionally, the cable is narrower compared to the Monster Cable which makes it less visible. I did however notice that the Monster Cable is much more pliable.
mchambers140 Posted
Bought this product to connect back speakers to my living room surround sound setup. The wires are good quality and are easy to work with. I am satisfied with this product.
Wisewizard777 Posted
Love this speaker cable. It’s flat, not bulky. Easy to strip if necessary, although I got the Rocketfish banana plugs, where no stripping or tools were required. IMO the sound is great and I have had no issues so far.
NJJohnnyC Posted
This is not only flat and easy to use in special applications, but also high quality and easy to work with. I used this on an outside application to have it flat against some siding and the tucked in the channel of an eve on the house. Just perfect!
WolfmanXII Posted
I mean, how much can you really say about speaker wire?! But all in all, it has been working outdoors for months now and have had no issues. Sound greats! Also, wire is flat and very thin so was able to hide easily. Great buy!
DJTJ Posted
I used this product for my home theater and it works great. The sound quality is good and the wire is rated for “in-wall” use. It was easy to run into my ceiling and is barely visible unless you are looking for it.
Squared Posted
Excellent wire for use in new or replacement speaker setup. Wire is easy to prepare for connection and code to ensure polarities are maintained. Great value and high quality.
MAGAMAN Posted
Currently using this for my Bluetooth speakers on my patio, attached from the power speaker to the non-powered speaker it’s working perfect nice and flat easy to hide
robb Posted
Love this wire. It lays flat is easy to work with. I ran it up the corner of my walls and you barely see it. Great quality. Would buy again.
CJM429 Posted
This a a good quality speaker wire and has very good flexibility to follow the contour of your ceiling or walls, depending on how you run the wire to your receiver.
Greta Posted
Used this to connect some outdoor speakers to an audio receiver on my back porch. Works great! Easy to use and install.
iPhonewallet Posted
The wire is great. It sits flat against my baseboard and you can’t see it at all. I can wrap it around my room and hide it really easily. It is good quality and made well.
RobVi Posted
this speaker wire lies flat, making it easy to hide along the baseboards and easier to bundle up and hide. Very flexible and easier to work with.
Miz39 Posted
Quality wiring, used for sonance speakers and sonos amp. Very happy and easy to cut/use.