The GEN-X212LD is a loaded subwoofer enclosure with a ported box. It comes with 2 12" subwoofers already installed and wired, so you only add an amplifier. Total power handling is 900 watts RMS and 1800 watts peak. The box has an internal volume of 90.6L / 3.2ft3 and a port tuned to 35Hz. Construction is 1/2" / 15mm MDF finished in black carpet. Everything is assembled and ready to drop in, which saves the cost and time of building a custom enclosure.
Two GEN-X124D 12" subwoofers already mounted in a ported enclosure built to spec. This is the setup that turns heads, arriving assembled instead of as a project you have to coordinate across a driver, a box builder and an amp.
Twice the cone area in 3.2 cubic feet of properly tuned ported volume. The port loads the drivers where it matters, so output at the bottom end is dramatically higher than a sealed pair on identical power.
900W RMS / 1800W max across both drivers, with the coils wired for an efficient final load. That is enough output to feel in your chest at highway speed, not just hear.
Thick treated MDF handles the vibration two 12s generate and keeps the panels from resonating. A weaker box turns that energy into rattle: this one turns it into bass.
Each GEN-X124D runs a 67 oz ferrite magnet and a high-excursion suspension, letting the cones travel far enough to move real air. The result is depth and impact, not just volume.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Reviews coming soon