DS18 Audio - IXS 10" Shallow-Mount Fiber Glass Cone Subwoofer, 600W RMS Single 4-Ohm
Model: IXS10.4S
SKU: 13007766
Reviews coming soon
Reviews coming soon
The IXS10.4S is a 10" car subwoofer from the DS18 IXS series. It handles 600 watts RMS and uses a single voice coil at 4 ohms per coil, which keeps wiring simple with most monoblock amplifiers. Peak power handling is 1200 watts. The cone is fiber glass. The shallow-mount basket fits tight spaces and under-seat enclosures where a standard-depth subwoofer will not clear. Mounting requires a 9.25" cutout diameter and 3.66" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.
Rated at 600 watts RMS and 1200 watts peak. Behind that rating: 2.5" voice coil on an aluminum former wound with Copper wire and a 62 oz ferrite motor. That is what lets a 10" cone move this much air without losing control.
The single voice coil design keeps wiring simple and works with most monoblock car amplifiers without impedance calculations.
The fiber glass cone stays rigid at high excursion while resisting fatigue over time, so the driver keeps its shape and output under sustained high power.
This 10" subwoofer requires a 9.25" cutout diameter and 3.66" of mounting depth. DS18 recommends a sealed enclosure of 0.5 cu ft. Check these numbers against your enclosure before ordering: enclosure volume and tuning change the low-frequency response as much as the driver does.
The shallow mount basket fits under seats, behind seats and in tight factory locations where a standard depth 10" subwoofer will not clear. Confirm your available mounting depth before ordering.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Learn more >