DS18 Audio - PRO-W 10" Neodymium Subwoofer, 400W RMS Single 2-Ohm
Model: PRO-W10.2SNEO
SKU: 13007940
Reviews coming soon
Reviews coming soon
Rated at 400 watts RMS and 800 watts peak. Behind that rating: 2.5" voice coil on a til former wound with SV wire and an 8.8 oz ferrite motor. That is what lets a 10" cone move this much air without losing control.
The single voice coil design keeps wiring simple and works with most monoblock car amplifiers without impedance calculations.
A 91dB sensitivity rating turns amplifier watts into audible output efficiently, so you get more usable bass from the power you already have.
This 10" subwoofer requires a 9.1" cutout diameter and 4.25" of mounting depth. DS18 recommends a sealed enclosure of 1.4 cu ft and a ported enclosure of 1.5 cu ft tuned to 45Hz. Check these numbers against your enclosure before ordering: enclosure volume and tuning change the low-frequency response as much as the driver does.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
The PRO-W10.2SNEO is a 10" car subwoofer from the DS18 PRO-W series. It handles 400 watts RMS and uses a single voice coil at 2 ohms per coil, which keeps wiring simple with most monoblock amplifiers. Peak power handling is 800 watts. The water-resistant cone holds up to moisture and spray in open-air installs. Mounting requires a 9.1" cutout diameter and 4.25" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.
Learn more >