DS18 Audio - PSW 10" Shallow-Mount Subwoofer, 500W RMS Single 4-Ohm
Model: PSW10.4S
SKU: 13007688
The PSW10.4S is a 10" car subwoofer from the DS18 PSW series. It handles 500 watts RMS and uses a single voice coil at 4 ohms per coil, which keeps wiring simple with most monoblock amplifiers. Peak power handling is 1000 watts. The water-resistant cone holds up to moisture and spray in open-air installs. The shallow-mount basket fits tight spaces and under-seat enclosures where a standard-depth subwoofer will not clear. Mounting requires a 9.2" cutout diameter and 3.0" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.
Reviews coming soon
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Rated at 500 watts RMS and 1000 watts peak. Behind that rating: 2.5" voice coil on an aluminum former wound with Copper wire and a 58 oz ferrite motor. That is what lets a 10" cone move this much air without losing control.
The single voice coil design keeps wiring simple and works with most monoblock car amplifiers without impedance calculations.
The shallow mount basket fits under seats, behind seats and in tight factory locations where a standard depth 10" subwoofer will not clear. Confirm your available mounting depth before ordering.
This 10" subwoofer requires a 9.2" cutout diameter and 3.0" of mounting depth. DS18 recommends a sealed enclosure of 0.5 cu ft. Check these numbers against your enclosure before ordering: enclosure volume and tuning change the low-frequency response as much as the driver does.
A 84dB sensitivity rating turns amplifier watts into audible output efficiently, so you get more usable bass from the power you already have.
Learn more >