DS18 Audio - SELECT 10" Subwoofer, 220W RMS Single 4-Ohm
Model: SLC10S
SKU: 13007842
Reviews coming soon
Reviews coming soon
The SLC10S is a 10" car subwoofer from the DS18 SELECT series. It handles 220 watts RMS and uses a single voice coil at 4 ohms per coil, which keeps wiring simple with most monoblock amplifiers. Peak power handling is 440 watts. Mounting requires a 9.13" cutout diameter and 4.45" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.
Rated at 220 watts RMS and 440 watts peak. Behind that rating: 2" voice coil on an aluminum former wound with CCAW wire and a 45 oz ferrite motor. That is what lets a 10" cone move this much air without losing control.
The single voice coil design keeps wiring simple and works with most monoblock car amplifiers without impedance calculations.
A 88dB sensitivity rating turns amplifier watts into audible output efficiently, so you get more usable bass from the power you already have.
This 10" subwoofer requires a 9.13" cutout diameter and 4.45" of mounting depth. DS18 recommends a sealed enclosure of 0.5 cu ft and a ported enclosure of 1.25 cu ft tuned to 30Hz. Check these numbers against your enclosure before ordering: enclosure volume and tuning change the low-frequency response as much as the driver does.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Learn more >