Memphis Car Audio - Memphis Audio PRXL12FTV 12" RGB LED Car Audio Subwoofer, Tri-FLEX, 500W RMS - Black/Gray

The Memphis Audio PRXL12FTV is a 12-inch Power Reference RGB LED car subwoofer rated for 500 watts RMS and 1000 watts peak. Its integrated RGB LED cone ring adds illumination to the bass installation, and Tri-FLEX technology provides selectable 1-, 2- or 4-ohm impedance. The RGB ring follows the edge of the black polypropylene cone, adding color at the woofer itself. This makes the PRXL12FTV a useful choice for a custom trunk or cargo-area enclosure where the subwoofer remains visible. The LEDs require a hardwired 12V connection or the Memphis MXRGBBTC RGB controller, sold separately. Tri-FLEX uses a jumper plug to select the subwoofer's impedance. Match the load to your amplifier and system wiring, then revisit the setting if you change amps or add a second sub. Three selectable loads give you options for the original installation and future changes to the bass system. A stitched butyl rubber surround and reinforced spider support the polypropylene cone, while DVVC Direct Voice Coil Cooling helps exhaust heat from the coil area. The design includes a 2-inch voice coil and woven tinsel leads. Installation requires an 11-inch cutout and 5.5 inches of mounting depth. Compare the supplied sealed and ported enclosure recommendations when choosing your box. TECH SPECS • Model: PRXL12FTV • Nominal size: 12 inches • Power handling: 500W RMS / 1000W peak • Impedance: 1, 2 or 4 ohms selectable • Technology: Tri-FLEX • Mounting depth: 5.5 inches • Cutout diameter: 11 inches • Voice coil diameter: 2 inches • Magnet weight: 63 oz • Sensitivity: 85.6 dB @ 1 ohm / 85.5 dB @ 2 ohms / 86 dB @ 4 ohms • Product type: Car subwoofer • Series: Power Reference • Cooling: DVVC Direct Voice Coil Cooling • Lighting: RGB LED cone accent ring • Cone: Black polypropylene • Surround: Stitched butyl rubber • Spider: Reinforced • Leads: Woven tinsel leads