Pioneer - Subwoofer - Black
- Key Specs
- RMS Power: 100 watts (The maximum amount of continuous power the device is able to handle.)
- General
- Product Name: Subwoofer
- Brand: Pioneer
- Model Number: SW-8MK2
- Audio
- Minimum Frequency Response: 1000 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 0.1 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Impedance: 0.25 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Enclosure Type: Vented
- Enclosed: true
- Peak Power Handling: 100 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Dimensions
- Product Height: 14.18 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 12.19 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 14.19 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 20.3 pounds (The out of box weight of the item.)
- Material
- Woofer Composition: ABS
- Warranty
- Manufacturer's Warranty - Parts: 1 year
- Manufacturer's Warranty - Labor: 1 year
- Other
- UPC: 012562906133
Enjoy rich, immersive bass with this Pioneer SW-8MK2 subwoofer that features phase and frequency controls, so you can easily customize your sound. High- and low-level inputs allow flexible installation.
- Subwoofer: Delivers authoritative bass for high-impact home theater audio.
- 100W amplifier: Provides powerful volume with realistic sound.
- Phase and frequency controls: Enable customizable setup.
- Vented enclosure: Offers extended, deep bass performance.
- High- and low-level inputs: For flexible installation.
Whats Included
- Pioneer Subwoofer
- Owner's manual
A: You will need a RCA audio cable.
A: You can use any good quality RCA cables. Use the audio out for the subwoofer on your receiver to the pioneer sub. This unit puts out huge base just a peace of advice set the subwoofer on a subwoofer stand it makes a big difference on sound quality. Hope this helps you out.
Q: Is this subwoofer compatible with a Vizio soundbar?
A: Absolutely. Just use the "sub out" line on the back of your soundbar. As mentioned you will need a Y splitter and use it one of two ways. Option A. A triple "male" Y cable can be inserted into the back of your soundbar, then hooking up your RCA cables, attaching them to the adapter and back of the sub. Option B. Buy a single male RCA cable with a single female/2 male Y. Plug your single RCA into your sub out line, then the single into the female end of the Y cable, finally plugging in the male RCA ends to your sub. I've had this sub for over 4 years, still thumping. Thanks A. Jones.
Q: Can this be used in my honda?
A: no
Q: Pioneer saw-8Does this subwoofer have a fuse? If so, where?
A: Yes, it's on the PCB inside the back panel.
A: undefined
A: I bought the Pioneer subwoofer for someone else and helped install it. It is connected to a Sony amplifier/receiver together with a pair of B&W speakers and works very well. I suggest making sure you are connecting it to the right outlet on the back of your amplifier and that you follow the subwoofer instructions regarding the controls on the back of the subwoofer. I hope this helps.
