Greenworks - 80 Volt 16” 2kW Chainsaw with 4.0 Ah Battery and Charger - Green

Work smarter and enjoy constant, fade-free power with the Greenworks 24V battery-powered 14” cordless chainsaw. With up to 210 cuts on a single charge, this lightweight, quiet-running saw with chain break that stops that chain when kickback is detected, and automatic chain oiler that keeps chain perfectly lubricated. With hassle-free, trigger starts, you’ll get to work fast, with no priming, no choke, and no pull cord; plus, battery fully recharges in just 60 minutes. Greenworks exclusive Intelligent Power combines brushless motor technology, lithium-ion battery power, superior cutting, and ultra-fast control systems for powerful output equivalent. Includes two 4.0 Ah battery and dual-port rapid charger. Battery is compatible with 125+ Greenworks 24V products. Life. Powered. By Greenworks.

The Worx 10” – 20V Pole Saw takes the compact and lightweight standard Worx 20V Chainsaw and attaches a pole for up to 12 feet of reach so you can trim away problematic tree limbs. It’s the perfect marriage of our slim 6.2 lbs chainsaw (WG322.9) and our pole attachment so you can leave the ladder in the garage and have your feet safely on the ground when you work up in the air. Trust us, everyone in your family will be thankful for this safer method of trimming away tree limbs. Modern features make this pole saw easy to operate. The handle at the bottom of the pole features an on/off switch, so you don’t have to constantly raise and lower the chainsaw just to turn it on and off. The battery attaches at the base of the pole, when connected, for easy switch out when you need to recharge. And it snaps into the saw itself when you’re using it independently. As part of the Power Share platform, it uses the same batteries as every other tool, outdoor power and lifestyle product in that family. Oh, did we forget to mention that this 2-in-1 works on the ground just as well as it does in the air? The pole comes off easily without the need for any tools, and you get a fully functional chainsaw to chop up fallen branches and the like on the ground. The auto-tension and auto-lubrication systems keep the tool and the chain in peak condition every time you use it. And the 20V 2.0Ah battery and charger that come with this pole saw can be used to operate every tool on the Worx Power Share platform, saving you money in the long run.

The Worx Nitro 40V Power Share 16” Cordless Chain Saw with Brushless Motor was developed to provide greater performance without all the drawbacks of using a gas-powered tool. 40V of power and a high-efficiency brushless motor combine to spin the high-speed 16” chain at up to 59 ft./s., but at a fraction of the cost of operating a gas-powered chain saw over its lifetime. Battery powered chain saws are less expensive to power and maintain, and are cleaner than gas-powered tools. They’re designed for professional use or for advanced DIY-ers. With the Nitro 40V Chain Saw you can cut up to 30” diameter logs that are on the ground or 15” diameter trees and limbs that are still standing. The one-touch tool-less tension system prevents the chain from overtightening and the automatic chain lubrication feature ensures you’ll always have a well-oiled chain which increases the life of both the bar and the chain. The chain pitch is 3/8 in. and this battery powered chain saw weighs only 15.3 lbs. with the batteries installed and 12.4 lbs. bare. (That’s light for a chain saw when compared to older, traditional models.) Can be used for residential home flippers or property owners that need to clear land or chop up fallen tree limbs after a storm. It’s great for disaster clean-up crews, or forestry, nature preserve, and wildlife staff.