
4.5 Cu. Ft. Front Load Washer with Steam and LuxCare Wash features LuxCare Wash and Perfect Steam technology to provide a thorough clean for clothing and fabrics. The 18-Minute Fast Wash cycle allows you to quickly deep-clean the items you need the most.
A: Hi there, thank you for reaching out to us regarding your inquiry. Yes, what you're seeing is actually totally normal for many front-load washers. ✅ Wash Cycle – Water at the Back of the Drum. During the main wash cycle, water usually enters from the back or top rear of the drum. This is where detergent gets mixed in and the washer begins agitating the clothes. ✅ Rinse Cycle – Water from the Front Cascade (above the door) During the rinse cycle, water often flows through a “cascade” or waterfall inlet at the front/top of the drum, just above the door. This design helps rinse detergent residue off the door and clothes and improves overall rinse performance. This dual-water-entry design helps distribute water more effectively during different phases of the cycle. Electrolux uses it to improve wash and rinse performance while being efficient with water and energy. - Jessica
Q: Does this machine pour water over clothing during washing?
A: Thank you for reaching out to us. This model, like most front-loading washers, uses a tumbling action and a specific water distribution system to effectively clean clothes. Overall, while the washer does not pour water over clothing in the traditional sense of pouring from above, it effectively uses a combination of tumbling, water distribution through jets or sprays, and proper detergent dispersion to clean clothes thoroughly. This method is efficient in reducing water usage compared to top-load washers, as front-load washers generally use less water per cycle. We hope this information helps. - Maria
A: Thank you for reaching out. Yes, this model is stackable. The Stacking Kit Model Compatibility: STACKIT7X ~Ruth
Q: Does this machine have to be emptied of leftover water and a filter basket that needs to be cleaned?
A: Hi, Reg! Thanks for reaching out ! To clean and freshen the washer, perform the clean washer cycle. For best results perform the cycle once a month. Furthermore, Every 50 cycles, your washer will remind you to perform the clean washer cycle by illuminating the clean washer cycle indicator. Please see page 40 of your user manual for more information on care and cleaning requirements. We hope this helps! ~Sam
A: Hi there! Thank you for reaching out. No, the dryers typically paired with the Electrolux washer model ELFW7437AG (such as the ELFE7437AG electric dryer or ELFG7437AG gas dryer) are not ventless. - Patrick
Q: In which country is the machine manufactured ?
A: Thanks for your inquiry. The specific manufacturing location for the model ELFW7437AG isn't explicitly indicated. However, Electrolux operates manufacturing facilities in the U.S., such as in Anderson, South Carolina, and in Juarez, Mexico, where many of our appliances are produced. -Yhano
Q: How tall will this washer be with the stacking kit and the coordinating dryer?
A: Thanks for your inquiry. When the Electrolux models ELFW7437AG (washer) and ELFE7437AG (dryer) are stacked using the STACKIT7X stacking kit, the combined height is approximately 80 inches. The washer and dryer are both around 38 inches tall. -Yhano
A: Hi, Jon! Thank you for this inquiry and for bringing it to our attention. The reason why the lint filter cannot be accessed is because this unit has a built-in drain pump with the filter in it. The washer was designed to not have an accessible lint filter, and therefore, mainly, it's not stated on how to access, clean, or troubleshoot it in the Care & Use manual. To view the drain pump assembly, please check out this part manual and go to page 7: Motor/Tub, look for 35 # 5304505209 Drain Pump, assembly, IDB, w/filter, and locate it on the diagram on page 6. https://na2.electroluxmedia.com/Original/Electrolux/Electrolux%20Assets/Document/Parts%20Manual/5995736062.pdf We hope this information helps! ~Juan