Onkyo - 2-Channel Stereo Amplifier - Black
Model: A-9010
SKU: 4593800
This item is no longer available in new condition. See similar items below
- Key Specs
- Number of Channels: 2 (The number of discrete channels of sound output. This can be a single number or multiple numbers separated by decimal(s). The first number is the primary, horizontally directed audio channels. The number after the first decimal, if applicable, is the number of subwoofer outputs or channels. The number after the second decimal, if applicable, is the number of height or atmospheric channels designed to immerse the listener by producing overhead sound effects.)
- General
- Product Name: 2-Channel Stereo Amplifier
- Brand: Onkyo
- Model Number: A-9010
- Audio
- Maximum Watts x Channel @ Ohms: 44W x 2 @ 8 ohms (This is the maximum load the speaker, subwoofer or amp can drive.)
- Number of Channels: 2 (The number of discrete channels of sound output. This can be a single number or multiple numbers separated by decimal(s). The first number is the primary, horizontally directed audio channels. The number after the first decimal, if applicable, is the number of subwoofer outputs or channels. The number after the second decimal, if applicable, is the number of height or atmospheric channels designed to immerse the listener by producing overhead sound effects.)
- Minimum Frequency Response: 10 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Total Harmonic Distortion: 0.08 percent (Measurement of the harmonic sound distortion. The lower the percentage, the cleaner the sound.)
- Maximum Frequency Response: 100 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Signal-to-Noise Ratio (SNR): 92 decibels (The ratio of the desired signal's strength to the level of background noise. A ratio higher than 1:1, which equates to greater than 0 decibels, indicates more signal than noise.)
- Inputs
- Line-Level Inputs: true (Also referred to as low-level inputs. Enables the amplifier to receive a sound signal from another device via RCA cables.)
- Dimensions
- Product Width: 17 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 5 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 14.3 pounds (The out of box weight of the item.)
- Other
- UPC: 751398012099
Bring entertainment to life in your home theater with help from this Onkyo A-9010 2-channel stereo amplifier, which utilizes WRAT (Wide Range Amplifier Technology) and a Wolfson 192kHz/24-bit DAC (digital-to-analog converter) for crisp, high-resolution audio.
- Handles up to 44W per channel @ 8 ohms: For rich, clear sound.
- Phono equalizer: For simple control.
- WRAT (Wide Range Amplifier Technology): With discrete amplifier output circuitry and an extruded aluminum heat sink supports high-current delivery with minimal distortion.
- Wolfson 192kHz/24-bit DAC: For high-resolution sound.
- Thick speaker plates: With gold-plated, banana plug-compatible speaker posts promote reliable signal transfer.
- 2 digital audio inputs: With up to 192kHz/24-bit coaxial and 96kHz/24-bit optical sampling rate support.
- 5 analog audio inputs (4 rear/1 front): Along with 1 analog audio output (rear) and a phono input for flexible connectivity.
- 1/4" (6.3mm) headphone jack: With independent headphone amplification circuitry for a quality private listening experience.
- 10Hz - 100kHz frequency response: For accurate sound reproduction.
Whats Included
- 2-Channel Stereo Amplifier
- Remote with 2 AAA (RO3) batteries
- Owner's manual
A: I don't know how many in and out plugs you have in the back of your unit. One way is to plug the equalizer into the tape recorder plugs..In to in and out to out...Then set it on tape and it should work..
Q: How does it connect to a computer?
A: undefined
Q: Is there a way to connect a cassette deck to this item?
A: You can hook up a tape deck even thought it does not appear to have a tape loop. Hook your Record In to the line out of the amp and choose one of the Line Level Inputs for playback. The upshot is you can select what source to record from and then switch to your input for the tape deck to listen to what you just recorded.
A: Yes you can. There are multiple RCA inputs for audio sources.
