“I noticed after the dishwasher cycles are all done the dishes are still wet. Why is that?”
Answer This Question
1-4 of 4 Answers
Add jet dry to help dry it.
Sorry, there was a problem. Please try again later.Whirlpool-made Amana dishwashers are known for not drying even if Rinse Aid is used. Unfortunately this is a design 'flaw' if you want to call it. Steer clear and buy a different brand.
Sorry, there was a problem. Please try again later.Hope, please make sure that you are using a rinse aid with your Dishwasher. Because of our Dishwashers being energy efficient, they use less water and energy so we depend on rinse aid to help with the drying of the dishes. It is normal for some moisture to be inside of the Dishwasher. We would recommend that you increase your rinse aid setting to dispense more rinse aid, as that will help the drying of the dishes. It can take up to 30 washes for the rinse aid to distribute inside of the Dishwasher and for you to notice a difference in the water left on the door and the walls. We also would recommend using the heated dry option. We hope this helps!
Sorry, there was a problem. Please try again later.On the front panel there is a button named “HEATED DRY”. Heated dry has an indicator light to tell you it is selected. Use heated dry if you want your dishes dry at the end of the cycle. Check the “CLEAN” light is on to be sure the wash cycle is done.
Sorry, there was a problem. Please try again later.