A:AnswerIt will NOT play 78's. The turntable does not have a 78 rpm speed and it does not have a suitable stylus for playing 78 rpm records, particularly if they are the older short-play shellac type records. The turntable is designed for playing 33-1/3 and 45 RPM vinyl type records only.
A:AnswerThe power adapter for the AT-LP60XBT Turntable may be purchased direct from our website at the following link.
https://www.audio-technica.com/en-us/atpt-lp60xpsu
A:AnswerCheck the belt routing. The belt comes preinstalled around the drive rim on the flipside of the aluminum record platter (see below), but you have to finish installing it by placing it around the motor pulley after installing the platter on the spindle. Make certain that you are placing the belt around the brass-colored motor pulley after installing the platter. To check this, simply remove the black felt record mat from the turntable and rotate the aluminum record platter by hand until one of the large rectangular shaped openings in the platter is located in the upper left corner of the turntable (at about the 10 o’clock position). Look into the opening and locate the brass colored motor pulley. Is the belt around this pulley and is the belt taught? The belt does NOT go around the white post located on the right side of the turntable (at about the 2 o’clock position).
A:AnswerThe turntable will require servicing to correct this problem. Please contact our turntable repair department at (330) 686-2600 extension 5009 for further assistance.
