A:AnswerThere's an aux port on the back side of the turntable. I use an aux cord and connect it to a JBL Charge 3 speaker. There are other options that are stated in the manual that you can use but aux is the easiest. You would just need an aux cord and a speaker with an aux port. Any speaker works, it just depends on your preference for audio quality and loudness.
A:AnswerYes. This turntable includes a pre-amp.
Just set the output switch to “Line”.
The connection on the back is a single
3.5mm audio jack, and comes with a cable that splits l - R into RCA plugs, so cabling to your speakers will likely require a different cable
A:AnswerYes it’s compatible with this model it has a phono red and white connection and an additional power plug that goes straight into an outlet to give it power I would suggest not actually plugging the power cord in until you get it all setup because mine automatically started playing and it will drop the needle on the platter wether you’re ready or not and damage the needle or have a record ready incase it starts automatically the first setup cheers!
A:AnswerTop down- 14-1/8” wide (side to side) x 14-1/2” deep (front to back) x 3-7/8” high (top to bottom)
Top up- same width x 15-1/2” deep x 14” high
The top only opens to about 45 degrees. This is quite adequate for function.
