A:AnswerThe turntable is compatible with many brands. It can remember the pairings of up to 8 different DEVICES. This is so you do not have to go through the pairing process again when switching from one device to another. For example, you may want to use it with your Bluetooth speakers during the day, then switch to your Bluetooth headphones at night. Turn the speakers OFF, then turn the headphones ON and the headphones should connect right away.
A:AnswerNot wirelessly, no. If your MacBook Pro has a standard 3.5 mm stereo audio input jack on it however, you could use a 3.5 mm male stereo to 3.5mm male stereo cable to connect the turntables to this input.
A:AnswerNo, we do not manufacture a turntable that can play multiple records in sequence without user assistance at this time. The turntable is automatic in operation in the sense that it can start at the touch of a button, play the entire side of a record, then automatically return the tonearm to the resting position and stop the record from spinning without additional user assistance.
A:AnswerTry resetting the Bluetooth on the turntable again. Note that the procedure was recently amended. Right after you press the button and the light starts flashing red/blue, let go of the button for like 1 second THEN press and hold it down until you see the light flash just RED slowly twice. See the full procedure below.
Resetting the Bluetooth on the AT-LP60XBT and AT-LP120XBT-USB-BK Turntables.
1. Unplug your Sound Link 3 speaker from power. Turn any other devices that have previously been paired to the turntable off (power them down), then reset the Bluetooth on the turntable by doing the following.
2. Without the turntable being in the pairing mode (the indicator light on the turntable should be solid red), press and hold down the Bluetooth button on the turntable for about 5-8 seconds. You will see the light begin to flash red and blue rapidly back and forth as it does when it goes into the pairing mode. After about 1 to 2 seconds of seeing this, briefly release the button (for about 1 second) then press and hold the button down until you see the light blink just RED slowly - twice, then the light will go back to flashing red and blue. It may take up to a minute or so to see the light blink just RED twice. Once the light goes back to flashing red and blue, you may let go of the button.
3. Wait for the flashing red and blue light to time out, at which time it will go back to being solid red. This may take up to a minute or so to occur. Once the light is solid red, the Bluetooth function has been reset.
4. Plug your Sound Link 3 speaker back into power and attempt to pair the turntable to the speaker again.
A:AnswerYou may need to turn the Bluetooth on the speakers OFF, or just have the speakers powered off, while attempting to connect the headphones. The turntable has a tendency to connect to the last device it was used with if that device is on and its Bluetooth is on. The turntable can "remember" pairings of up to 8 different devices, so you should not have to go through the PAIRING process again.
A:AnswerContact our Parts Department for help obtaining a replacement. Parts may be reached by phone at (330) 686-2600 extension 5002 or by email at [email protected]
A:AnswerFollowing are two models of powered type speakers available at Best Buy that I have been recommending. The Edifier R1280T is wired only and the Edifier R1280DB can be wired or wireless. With the R1280DB model, which adds Bluetooth, in addition to using the turntable with it (wired) you could also use other devices, such as your smartphone, with it (wirelessly).
Edifier R1280T Powered Bookshelf Speakers
https://www.bestbuy.com/site/edifier-4-r1280t-powered-2-way-bookshelf-speakers-pair-brown/6402725.p?skuId=6402725
Edifier R1280DB Powered Wired or Wireless Bookshelf Speakers
https://www.bestbuy.com/site/edifier-4-r1280t-powered-2-way-bookshelf-speakers-pair-brown/6402725.p?skuId=6402725
