A:AnswerIn theory, yes if your refrigerator draws less than 600 watts as this unit’s max power is 600 watts. However, I would not recommend using it for a regular refrigerator unless it is a portable one like the ones you can use with a car outlet which usually run less than 300 watts. This unit uses a boost feature to be able to output 600 watts but it is very unstable.
A:Answer2.5 hours. 256 w storage capacity/100w bulb=2.5 hours approx. (there are some ineffeciencies and it is not recommended to go below 10% of capacity)
A:AnswerIf you want to choose solar panels from other brands, please make sure:
1. The specification of the solar panel meets the requirement of the device, 8A Max,11-30V 110W for RIVER 2;
2. The connector of the solar panel is MC4 type (so that it can be connected to the EcoFlow solar charging cable) or XT60 female type (so that it can be connected to the power station's input port directly). If its connector is of another type, you need to purchase an MC4 adapter or an XT60 adapter. Or you can check this guide to DIY MC4 connectors: https://bit.ly/333FB5j;
3. No controller comes with the solar panel. There is an MPPT board that controls solar charge inside the power station already. A separate controller would affect the solar charge.
A:AnswerDear Valued Customer, kindly send an email to support@ecoflow.com or call us at +1 (800) 368-8604 Mon-Fri 9 a.m.–7 p.m. (EST) so we can better assist and answer your inquiries.
A:AnswerThe EcoFlow River 2 is a compact portable power station, and it operates quietly, so you can power your laptop without any significant noise disturbance.
A:AnswerIf you want to choose solar panels from other brands, please make sure:
1. The specification of the solar panel meets the requirement of the device, 8A Max,11-30V 110W for the River 2;
2. The connector of the solar panel is MC4 type (so that it can be connected to the EcoFlow solar charging cable) or XT60 female type (so that it can be connected to the power station's input port directly). If its connector is of another type, you need to purchase an MC4 adapter or an XT60 adapter. Or you can check this guide to DIY MC4 connectors: https://bit.ly/333FB5j;
3. No controller comes with the solar panel. There is an MPPT board that controls solar charge inside the power station already. A separate controller would affect the solar charge.
Note: EcoFlow does not provide free service for any damage to the product caused by improper operation of the third-party solar panels.
